I knew there would be a group buy but I couldnt wait. A week ago I did this mod, And I will say this Bamachen, Gapguy, and Schaefer you guys rock for pioneering this set up. I got a great price from toyotaparts.com out of texas the guy that helped me was Greg(Not positive of name as my notes arent with me). I got a little over 2.5 inches of lift. I personaly went with the oem trd billies because my needs werent for of roading and it is a good set up for me(I run a snow plow). In stock format I drooped almost 3 inches with the plow now I sag just under an inch from my new height. It handles so much better with the weight, it was a marriage made in heaven.

Again props to those who dared to do this first to help those of us who who dont.

 

how many we got so far?
^
(redneck showing)

 

just three, right.
you're counting only the total packages?

 

bump!

 

I'm interested in tundra coils...

 

Mike,
I'm in for Tundra coils, N91S, 891's and N86's.
Whats the total price?

 

Tundra coils rock!

 

Hey Mike, I'm in too. Need the whole setup (shocks and springs...)


I'll also give you a call to get the rear set up figured out in the next few days.
(probably the same as mossback's...)

-Scott



edit: p.s. bamachem, *ka-ching*... sent.

 

To get the spacers and studs for $40, paypal me the money to me at bamachem@yahoo.com and mention that you want the group buy price. I'm limiting this to the first 10 ppl, so first come- first serve.

one pair of spacers (no studs) = $30
one pair of spacers and 6 studs = $40 shipped
two pairs of spacers (no studs) = $55
two pairs of spacers and 6 studs = $65 shipped

Gapguy had to use two pairs to get the front level w/ the rear since he's using OME 891's. I only needed one to level mine out w/ the downeys.

 

bamachem
i probably missed it but what spacers are these? are they like the cornfed spacers or are they just top hat spacers?

 

Top spacers like the revtek Top Out Spacers - 1/2" lift for a total of 2.0" on a 4Runner or 2.5" on a Tacoma.

 

bamachem- do you have 3/8" and 1/2" spacers. I have my lift complete(using Revetek t.o. spacers), but when i add my arb and winch would the 1/2" take care of the potential drop in height? if so, then i need some new spacers.
thanks

 

The 3/8" Revtek spacers work the same way Bamachem's 3/8" do (1/2" lift). If you already have them you don't need more...unless you want to double stack them, like I did.

Edit: Since you have the 891's you may want to get another set of spacers to make it level...I did.

 

you won't lose much - maybe 1/8 to 1/4 inch at most. the spacers are 3/8" thick and yeild 1/2" of lift.

 

8 sets left at these prices...

 

activated transfer of paypal already. Should take 3 days..........thanks again.

 

Quote:
Originally Posted by FilthyRich
bamachem- do you have 3/8" and 1/2" spacers. I have my lift complete(using Revetek t.o. spacers), but when i add my arb and winch would the 1/2" take care of the potential drop in height? if so, then i need some new spacers.
thanks


The 3/8" Revtek spacers work the same way Bamachem's 3/8" do (1/2" lift). If you already have them you don't need more...unless you want to double stack them, like I did.

Edit: Since you have the 891's you may want to get another set of spacers to make it level...I did.

will the extended studs we already have be long enough with double-stacked spacers? Did you notice any difference in ride quality with two sets??

 

The Revtek studs are just long enough for two sets. I didn't notice any difference in ride quality since the spacer is outside of the pack.

 

The studs are long enough, and the ride quality is exactly the same since the spacers are outside the pack and simply move the whole assembly down.

 

Awww..too slow