Steering arm swap question....
Nov 8, 2005 | 03:00 PM
#1
Thread Starter
Registered User
Joined: Sep 2005
Posts: 289
Likes: 0
From: Sevierville, TN
Steering arm swap question....
Do steering arms from fj40s have the same bolt pattern as those on the truck axles? In other words, will an fj40 steering arm fit on a truck axle?
Thanks,
Alex
Thanks,
Alex
Nov 21, 2005 | 02:56 PM
#4
Registered User
Joined: Aug 2005
Posts: 6
Likes: 0
From: Monroe, WA
Originally Posted by Flygtenstein
40's, 60's, 62's, all the same birf, same knuckle.
Arms can be interchanged. High steer works well.
Arms can be interchanged. High steer works well.
Early Cruisers (up to 78 or so IIRC) had a smaller bolt pattern on the knuckle. Obviously, those arms won't fit on your knuckles. Definitely all FJ60 arms will bolt up - but no J-arm on the driver's side if you're still running stock steering.
Thread
Thread Starter
Forum
Replies
Last Post
terminator
Misc Stuff (Vehicle Related)
3
Jul 27, 2015 07:13 PM
jon.r
General Vehicle Related Topics (Non Year Related)
8
Jul 11, 2015 03:34 PM
