hey guys im a newbie. i have a 94 toyota 4 x 4, 22r, i have a terrible squeel around the belts. i changed the bearing on the idler pulley for the p.s. belt, and it stopped for about 15 minutes, then started up again. this sucks!! any tips?

 

Welcome to the best forum around. As for your question, is the belt new and properly tensioned. If the belt is not properly tensioned, it will squel(sp). Other than that

 

Dittos, welcome to the forum.
My belts have squealed in the past, and for a temp fix I use to shoot them with WD40.

I found those belt dressing sprays did not work, and WD40 worked much better.
Sometimes for a month at a time before the sound would come back.

It sounds like you might need new belts too.
TIP:
Only buy Toyota belts.

I was a firm believer in the Gates brand as that is what I grew up with and my dad always used them.

I used them on my '90 Toy truck I use to have, and they did not work out right.

Genuine Toyota belts have a groove on them for the pulley, and just plain fit better.

After going to Toy belts after the Gates ones, the noise went away.
About a year and a half ago I went to all new Toy belts on my 4Runner, and not a peep from them.