remove rear drive shaft
#1
remove rear drive shaft
So for the past week I have had a squealing/clicking sound on light acceleration and coasting, especially at speeds ~20-40 miles per hour. Narrowed it down to either a bad u-joint or pinion bearing in the rear differential. I was considering removing the rear driveshaft, putting the car in 4wd, and driving around to see if the clicking has stopped? Would this help isolate the problem, and point me towards repairing the u-joint myself or taking it to a shop for the pinion bearing? Is it safe to drive short distances in "front wheel drive"?
Any help is appreciated.. thanks!
Any help is appreciated.. thanks!
#3
Make sure to use some PB blaster on the propeller shaft bolts, and pinion driveshaft bolts too, it took soaking them for 3 days and then still some serious muscle and a cheaterbar and hammer. Now I just need to change the rotten u-joint. re-torque to 54 ft. lbs.
Thread
Thread Starter
Forum
Replies
Last Post
bigblue82
General Electrical & Lighting Related Topics
10
Jul 6, 2015 08:27 AM
TNRunner88
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 1, 2015 08:00 PM
cchinny
General Electrical & Lighting Related Topics
6
Jun 25, 2015 08:11 PM






