I'm looking to see some pics from those of you who are running 33s with a body lift. Let me know how much lift you are running (both suspension and body).

Thanks.

 

I'm running a 1" RB body lift, and 2" up front and 2.5" in the rear of suspension lift:



Here's a shot of the 285/75R16's with just the body lift:



And here's a shot of the 285's without any lift at all:



Hope that helps!

Chris

 

Jackson,

I have a 2" RB body lift with 285/75/R16s which I upgraded from 225/75/R15s. Notice I got bigger rims. I rub slightly on full turn but in the near future I am going to do a suspension lift of SAWS and OMEs for about another 2.5" front and 3" rear. I don't have any pics up exept on my webshots and it is only one pic.

I got my Thule stuff yesterday and installed it. It looks sweet! Nice addition to the rig. Now for the lights!

Hope this helps!



Brian

 

2inch Roger BL w/ downey suspension lift (bout 2.5 of lift)

 

33" MT/R's, 2.5" suspension and 1" body

 

hey adam, wasnt that your rig? why did ya sell it??

 

hey Adam, what size tires are they the 33x11.5x16?
I want 33's after my 2 inch BL, but not sure if they will rub due to the width.

 

After doing my fendering trimming, even on my limted, you won't have any rubbing, except for on the frame, which there's nothing really you can do about it. I even had no rubbing with just a 1" body lift. Check out here: https://www.yotatech.com/forums/show...ender+trimming

Chris

P.S. I even did some pretty awesome off-roading with just the 1" body lift and fender trimming.

 

That was my rig, I sold it because it was too nice to take back in the woods, parts were too expensive to replace, and I needed the money, and I really wanted a 1st gen and a solid axle.


Those are Goodyear MT/R 285/75/16 on 16x8 black rock crawlers I think they have specs on goodyears website


www.toyotaoffroad.net/afertig/96/mtr