P1300
12-26-2008, 09:44 AM
#1
Registered User
Thread Starter
Join Date: Dec 2004
Location: So MS
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
P1300
Igniter circut malfunction.
I have a 90 model 4 Runner with A 3.4 swapped.
The timing dont seem to advance right when it's running good. When it's running bad it won't even idle and has no power.
I had several other codes which were P0304 P0305 P0306 and a random misfire code. Plugs and wires are new. I also tried a spare set of ignition coils with no luck. I've tried seafoam and premium gasoline. What else do I need to try?
BigBlock
I have a 90 model 4 Runner with A 3.4 swapped.
The timing dont seem to advance right when it's running good. When it's running bad it won't even idle and has no power.
I had several other codes which were P0304 P0305 P0306 and a random misfire code. Plugs and wires are new. I also tried a spare set of ignition coils with no luck. I've tried seafoam and premium gasoline. What else do I need to try?
BigBlock
12-27-2008, 09:30 AM
#2
Registered User
Thread Starter
Join Date: Dec 2004
Location: So MS
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
Well I found the prob.Windsheild leaks water into the ECM and it don't like that very much.Dried it out and all is well.Now to fix that leak.
Bigblock
Bigblock
Thread
Thread Starter
Forum
Replies
Last Post
Jayboy74
95.5-2004 Tacomas & 96-2002 4Runners
10
12-21-2021 08:27 AM
vasinvictor
95.5-2004 Tacomas & 96-2002 4Runners
26
03-21-2015 05:54 AM
