OME 906 and Trekmasters
Apr 8, 2014 | 04:32 PM
#1
Thread Starter
Registered User
Joined: Mar 2009
Posts: 15
Likes: 0
From: Northern Cal
OME 906 and Trekmasters
Hey, goin' nucking futs over searching and reading. Need your help.
Any issues running OME906's and Trekmasters in the rear of a '97 Limited 4x4? Don't want much lift (I have '99 Talls in the back), but want to limit sag when carrying a load.
Thanks in advance.
Any issues running OME906's and Trekmasters in the rear of a '97 Limited 4x4? Don't want much lift (I have '99 Talls in the back), but want to limit sag when carrying a load.
Thanks in advance.
Apr 18, 2014 | 01:16 PM
#2
Thread Starter
Registered User
Joined: Mar 2009
Posts: 15
Likes: 0
From: Northern Cal
Update
Super easy install, as expected. The OME are shorter (uncompressed) than the Toyota coils. Also, 1" lift, ground to fender, over the '99 coils, as expected. Seems, too, that there are no issues with the shocks and OME 906's. As expected.
...and the bonus of 5 "seat-of-the-pants HP"
20 mile report: rear seems stable and firm, but not stiff. Might be a bit of an improvement going over speed bumps.
Pleased with the investment.
...and the bonus of 5 "seat-of-the-pants HP"
20 mile report: rear seems stable and firm, but not stiff. Might be a bit of an improvement going over speed bumps.
Pleased with the investment.
Thread
Thread Starter
Forum
Replies
Last Post
WTB[PacNorWest]: Old Man Emu Torison Bars
A2theK
Axles - Suspensions - Tires - Wheels
2
Oct 14, 2015 07:10 AM
Swampwalker
95.5-2004 Tacomas & 96-2002 4Runners
5
Oct 12, 2015 09:49 AM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
Sep 5, 2015 06:52 PM
