95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Oil in the cooling system.

Old Aug 30, 2002 | 11:35 AM
  #1  
USMC3529's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 2
Likes: 0
From: sacramento
Oil in the cooling system.

I recently did a head gasket replacement on my 94 pickup. After 1000 miles I my engine started to overheat, so I blasted my heater to assist the engine cooling while I pulled over. I cooled the engine down, it never got a chance to hit the red, popped the radiator cap and had milk shake city in my radiator. My head gasket was in great shape, my head pressure tested wonderful, and outside of a crack in the block I can't think of what else may cause my oil to pump into my water and not the other way around. Any suggestions?
Reply
Old Aug 30, 2002 | 10:53 PM
  #2  
Yoda's Avatar
Contributing Member
 
Joined: May 2002
Posts: 2,651
Likes: 1
From: North Bend, WA
Semper Fi!

Since the oil pres is usually over 30 psi, and the coolant is about 14 psi it is possible for it to go to the coolant only.

Is it a 4 or 6? Auto or stick? (auto may cause "pink" milkshake)


BTW: USMC 74-81, H-46's and UH-1N's

David
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
calderp
Engine Swaps
2
Aug 16, 2016 05:15 PM
Esibnitsud
86-95 Trucks & 4Runners
11
Jul 30, 2015 08:21 PM
irritech
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 27, 2015 05:15 PM
calderp
Pre 84 Trucks
8
Jul 27, 2015 09:58 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 04:18 AM.