niose while turning 2nd gen
Jun 17, 2004 | 02:25 PM
#1
Thread Starter
Registered User
Joined: Dec 2003
Posts: 72
Likes: 0
From: pensacola fl
niose while turning 2nd gen
Well,
My second gen runner with about 153k on it seems to be falling apart.. The main seal and another seal on the xmsn seem to have ˟˟˟˟ the bed.. Also, When I crank the wheels all the way either direction the suspension or something up front is making some loud ass creeking noises.. I am thinking ball joints.. But I am not sure.. Anybody else have this happen? Also I am looking for a panhard drop bracket for the downey 2.5 lift anybody know where I can find one? thanx
jake
My second gen runner with about 153k on it seems to be falling apart.. The main seal and another seal on the xmsn seem to have ˟˟˟˟ the bed.. Also, When I crank the wheels all the way either direction the suspension or something up front is making some loud ass creeking noises.. I am thinking ball joints.. But I am not sure.. Anybody else have this happen? Also I am looking for a panhard drop bracket for the downey 2.5 lift anybody know where I can find one? thanx
jake
Jun 17, 2004 | 04:36 PM
#3
Registered User
Joined: May 2004
Posts: 431
Likes: 0
From: Canterbury New Zealand
Originally Posted by fooddude
The turning noise happens to a lot of runners. Usually if you just dab some grease on the Turn stops it will stop.
https://www.yotatech.com/forums/show...ighlight=stops
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
Hamonacracker
86-95 Trucks & 4Runners
7
Jul 17, 2015 08:33 AM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
Jul 6, 2015 10:00 AM
