Hey all... I've had my flexalite fan in for about 2 months now, and its been working great. When I first installed it, I never wired the A/C relay and after putting it off for a while, I'd like to finish the install. I need help finding the right wire to tap. I'm confused by the flexalite directions, and I've heard that you can just tap the A/C fuse in the engine compartment. The only fuse that I could find is the 30 amp condenser fan fuse (shown in the image below). Is this what i should tap into?

 

come on i know there's plenty of people out there with flexalite fans that have done this before...

 

Not sure if this will help, but did you see the write-up in Tech?

It's not a Flexalite brand, but perhaps you can contact Chris and ask him if you can wire it up his way or not.

 

that was a custom install on a standard electric fan, the flexalite fan has an additional a/c hookup and thats what i'm looking for. Can anyone help?

 

Try PM-ing or e-mailing UK-Meyers. I know that he installed the Flexi-Lites in his 2nd Gen.

David