95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Manual transmission help

Thread Tools
 
Search this Thread
 
Old May 22, 2015 | 06:43 PM
  #1  
RedneckRanger70's Avatar
Thread Starter
Registered User
 
Joined: May 2015
Posts: 1
Likes: 0
Manual transmission help

So my wife has a '95 Tacoma 5spd 3.4L 4x4 and I am in the middle of having the bearings and seals replaced however we have discovered the transmission output shaft/transfer case input shaft has had the splines severely damaged and needs to be replaced. Toyota wants $900 and the cheapest low mileage used transmission is around $650 shipped. My buddy has a 5spd out of a '94 4 runner 3.0L and I'm wondering if the guts (i.e. the shaft) might be the same. Any ideas??? Thanks
Reply
Old May 25, 2015 | 02:33 PM
  #2  
fierohink's Avatar
Registered User
20 Year Member
 
Joined: Apr 2005
Posts: 1,435
Likes: 95
From: Frederick, MD
Why so much from Toyota? Was that for the shaft only? Check with Marlin and see if they sell the part you are looking.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Liadrin
84-85 Trucks & 4Runners
20
Apr 25, 2022 02:54 PM
4x4-runner
The Classifieds GraveYard
90
Apr 18, 2017 09:08 PM
RobotMoose
Diesel Swaps
8
Aug 2, 2015 11:00 PM
HookahRoo
86-95 Trucks & 4Runners (Build-Up Section)
4
Jul 20, 2015 07:06 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 10, 2015 06:21 PM




All times are GMT -8. The time now is 06:57 AM.