95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Looking for 3rd Gen Body/Body with blown motor.

Thread Tools
 
Search this Thread
 
Old Mar 29, 2008 | 09:08 PM
  #1  
NwRunner's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 453
Likes: 0
From: Woodinville, Washington
Looking for 3rd Gen Body/Body with blown motor.

Im looking for a 3rdGen 4Runner with a Blown motor/tranny, or a 3rd gen body. Looking for a good deal. Hoping to make a Body swap/Wreck recovery project and make a thread out of it. Good condition please.

Let me know
Reply
Old Mar 29, 2008 | 09:10 PM
  #2  
Ohio4R's Avatar
Registered User
 
Joined: Feb 2008
Posts: 233
Likes: 0
From: Cleveland, OH
Check your local craigslist.
Reply
Old Mar 29, 2008 | 09:13 PM
  #3  
Tofer's Avatar
Sponsor
 
Joined: Jul 2004
Posts: 9,173
Likes: 6
From: Puyallup WA.
i make you one helluva a deal on a 3rd gen frame and lower 1/2 of the body.... hell i'll throw in the roof too, but its a convertable at this point. i have lots of parts left over for sale as well. lots of pics here http://photography.eakland.net/main.php?g2_itemId=2527
Reply
Old Mar 29, 2008 | 09:47 PM
  #4  
NwRunner's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 453
Likes: 0
From: Woodinville, Washington
Originally Posted by Tofer
i make you one helluva a deal on a 3rd gen frame and lower 1/2 of the body.... hell i'll throw in the roof too, but its a convertable at this point. i have lots of parts left over for sale as well. lots of pics here http://photography.eakland.net/main.php?g2_itemId=2527
im not exactly sure whats for sale there, the lower half of the frame with no roof or doors or anything? The reason im looking for a body or one with a blown motor is because mine looks almost exactly like that one, just covered in dirt and a bit worse, but the frame/tranny/motor are fine.
Reply
Old Mar 29, 2008 | 09:51 PM
  #5  
Ohio4R's Avatar
Registered User
 
Joined: Feb 2008
Posts: 233
Likes: 0
From: Cleveland, OH
He basically need a roof and a right side.
Reply
Old Mar 29, 2008 | 09:54 PM
  #6  
Tofer's Avatar
Sponsor
 
Joined: Jul 2004
Posts: 9,173
Likes: 6
From: Puyallup WA.
where is snowtown? i have a bunch of stuff left. Driver side front and rear doors are fine, pass. door *might* be fine (hard to tell). the frame looks fine. i have most the interior plastics. my shop is in tacoma come take a look at what i got.
Reply
Old Mar 29, 2008 | 10:00 PM
  #7  
NwRunner's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 453
Likes: 0
From: Woodinville, Washington
i live in Snohomish, are you going to be at your shop tomorow? i will come take a look.
Reply
Old Mar 30, 2008 | 04:16 AM
  #8  
rearviewmirror's Avatar
Registered User
 
Joined: Nov 2004
Posts: 723
Likes: 1
From: AUSTEX fiveonetwo
I see ads for blown engine 4Runner in Texas all the time. If I had some time I'd start gathering up some 3.4s, swapping, and selling. I used to do a little side biz like that with Rx-7.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jerusry
Axles - Suspensions - Tires - Wheels
1
Oct 19, 2015 05:28 PM
snap-on
95.5-2004 Tacomas & 96-2002 4Runners
3
Aug 10, 2015 05:19 PM
ChiefTetlow
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
1
Aug 10, 2015 04:19 AM
93toyoguy
Newbie Tech Section
10
Aug 2, 2015 07:41 PM
toofly1999
86-95 Trucks & 4Runners
8
Jul 25, 2015 07:09 PM




All times are GMT -8. The time now is 06:45 AM.