MillerPKA

As I've stated on my other thread I'm buying either the TJM 15 or ARB Tacoma Bar tomorrow. Most of the pictures I've of ARBs on 4th gens include the limb risers attached. I was wondering if there was anyone who sold these for 3rd gen ARB. If not, where could I snag a pair that are on the 4th gen? Has anyone ever put them on a 3rd gen?

d0ubledown

what are you meaning by 'limb riser'? part of the bumper itself? pic of what youre referring to might help...

MillerPKA

I'm sorry to say I'm a hypocrite. After bitching at everyone for not using the search button, I've made this thread before doing so myself.

https://www.yotatech.com/forums/show...ht=limb+risers

The cables are the limb risers, or I guess guy wires as some say. After following links and the works I can't really find a good write-up for either mounting to tjm/arb or the roof rack.

RunnerUp

on a 3rd gen i think your going to have to drill holes in your bumper and roof and attach mounting points for the cables, our roof racks are too far back to go directly into them... oh, and go with the ARB

d0ubledown

aahh...those limb risers. for some reason i was thinking arms or legs looks pretty easy to put together...as long as you've got the roof basket. otherwise..you'd need to find some way to anchor the cable up top...

MillerPKA

haha ya know i think i am actually. i'm thinking up something for the roof rack as we speak. oh, could you post some close ups of the arb on yours? lots of different angles if you can man. I'm trying to decide if there's enough room to mount another CB antenna. I've seen several of these on TJMs, one was mounted on the side, the other seemed to be coming straight through the top. Any write-ups on these procedures?

MillerPKA

Don't mean to double post to refresh this thread but I would like anyone whose installed limb risers on the 3rd gen to speak up! I'm picking up my ARB in the morning and I would like to have all the wires and everything ready! There is little direct info on installing these