ISR Done On Tundra 3.4
#1
Registered User
Thread Starter
Join Date: Mar 2003
Location: Barrigada,Guam
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
ISR Done On Tundra 3.4
Well all I had to do was buy a plumbing end cap and plug up the hole. I also followed albpm write up on the newer engine FPR line.
I really didn't notice any gain in HP or TQ but I do Xler8 to 60mph a little faster which tells me there is a gain. I am really surprised on how well Toyota made the intake on my engineOnly if they did a better jod on the header design.:pat:
And as for the coolant bypass mod I really feel a gain when at WOT and the A/C is a lot cooler now.
I really didn't notice any gain in HP or TQ but I do Xler8 to 60mph a little faster which tells me there is a gain. I am really surprised on how well Toyota made the intake on my engineOnly if they did a better jod on the header design.:pat:
And as for the coolant bypass mod I really feel a gain when at WOT and the A/C is a lot cooler now.
#2
Re: ISR Done On Tundra 3.4
Originally posted by 03TundraTRD
I really didn't notice any gain in HP or TQ but I do Xler8 to 60mph a little faster which tells me there is a gain.
I really didn't notice any gain in HP or TQ but I do Xler8 to 60mph a little faster which tells me there is a gain.
Thread
Thread Starter
Forum
Replies
Last Post
FS[MidAtl]: 2000 Tundra (Parting out) Pennsylvania
ToyotaMD
Vehicles - Parting Out
1
11-09-2015 11:53 AM
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
10-01-2015 01:03 PM
4runnerFireman
95.5-2004 Tacomas & 96-2002 4Runners
2
09-29-2015 06:24 AM