I/O thermometer
May 3, 2003 | 11:47 PM
#21
Registered User
Joined: Dec 2002
Posts: 9,048
Likes: 2
From: Seattleish, WA
Originally posted by Tacoma Dude
Woohoo!
Got my I/O thermo in the mail today!
Thanks again for organizing Mark!
Woohoo!
Got my I/O thermo in the mail today!
Thanks again for organizing Mark!
Hey Mark... you mentioned footwell lights - what lights are you using? I'm thinking about doing this in my Tacoma but I'm not sure what kind of lights to use. Something easy to find, I hope? 
I just finished the install today:http://www.midiwall.com/4Runner/footwell.html
May 3, 2003 | 11:53 PM
#22
Contributing Member
Joined: Mar 2003
Posts: 8,345
Likes: 0
From: Orange County, CA
You know... I always speak too soon...
I'd just finished posting that last message when I did some lurking around and found another thread that had this link. Strange - those were the same lights I was looking at last week. Seemed a bit big - I guess I wasn't that far off
Looks good Mark - I'm about to head back to your site and see what other toys I can copy... I mean, emulate from you
I'd just finished posting that last message when I did some lurking around and found another thread that had this link. Strange - those were the same lights I was looking at last week. Seemed a bit big - I guess I wasn't that far off
Looks good Mark - I'm about to head back to your site and see what other toys I can copy... I mean, emulate from you
May 4, 2003 | 01:37 AM
#23
Contributing Member
Joined: Jul 2002
Posts: 324
Likes: 0
From: Tempe, AZ
I got my therm today. Thanks Mark!!!
I plan on installing it next week as soon as the DVD player is done. (this is dragging on!)
I plan to take the unit apart, and mount the "guts" in a remote location, and the LCD in a hole below the cig-lighter. (in that wasted space)
I want to re-locate the inside temp sensor to a better location, because the engine/tranny heats up that area pretty good. (I know because I have been driving with the center dash, and entire console out for 4 days now installing this DVD player)
I'll post pics when its done.
Dan
I plan on installing it next week as soon as the DVD player is done. (this is dragging on!)
I plan to take the unit apart, and mount the "guts" in a remote location, and the LCD in a hole below the cig-lighter. (in that wasted space)
I want to re-locate the inside temp sensor to a better location, because the engine/tranny heats up that area pretty good. (I know because I have been driving with the center dash, and entire console out for 4 days now installing this DVD player)
I'll post pics when its done.
Dan
May 7, 2003 | 07:24 PM
#24
Registered User
Joined: Feb 2003
Posts: 3,689
Likes: 4
From: Sarasota, FL
Originally posted by mpulver
I'm looking to mount mine in that "weird unused space that everything slips out of" at the base of the center console, just in front of the shifters. I dunno if that space exists in the 2nd gens as well...
I'm looking to mount mine in that "weird unused space that everything slips out of" at the base of the center console, just in front of the shifters. I dunno if that space exists in the 2nd gens as well...
steve
May 7, 2003 | 07:36 PM
#25
Registered User
Joined: Dec 2002
Posts: 9,048
Likes: 2
From: Seattleish, WA
Originally posted by Bumpin' Yota
Hey I got mine in the mail yesterday. Do I pay you? Going to go the paypal route in anycase....
Hey I got mine in the mail yesterday. Do I pay you? Going to go the paypal route in anycase....
You have a PM...
Thanks!
Mark
Thread
Thread Starter
Forum
Replies
Last Post
Swede
95.5-2004 Tacomas & 96-2002 4Runners
10
May 4, 2010 03:13 PM
