Help! I can't change my #6 spark plug (can't get to it)
Dec 5, 2016 | 08:06 AM
#1
Thread Starter
Registered User
Joined: Dec 2016
Posts: 7
Likes: 0
Help! I can't change my #6 spark plug (can't get to it)
I can't get to the #6 plug. The wrench won't fit in between the metal thing not sure what it is(?). How should I proceed? Thanks for your help!
# 6 Spark Plug, Drivers side, by the firewall.
View #2, from the top of the engine.
Dec 5, 2016 | 01:02 PM
#2
Registered User
Joined: May 2008
Posts: 4,591
Likes: 126
From: Montana
Can you get a swivel attachment in there with an extension?
I did my plugs, tubes and wires when I replaced my valve cover gaskets (looks like yours could use them too, if you're looking for another project
), so I didn't have to deal with this. Everything was out of the way. I'm sure with an extension and swivel you'd be able to get at it, though.
Makes it a little easier
I did my plugs, tubes and wires when I replaced my valve cover gaskets (looks like yours could use them too, if you're looking for another project
), so I didn't have to deal with this. Everything was out of the way. I'm sure with an extension and swivel you'd be able to get at it, though.Makes it a little easier
Last edited by 83; Dec 5, 2016 at 01:09 PM.
Dec 6, 2016 | 12:12 AM
#5
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
When I change my plug I remove the top bolt and loosen the bottom one on the bracket and just move it towards the front. of the engine.
Not like your changing plugs all that often
Not like your changing plugs all that often
Dec 6, 2016 | 04:34 AM
#6
Contributing Member
Joined: Jan 2004
Posts: 1,757
Likes: 46
From: Ellicott City, MD
