Help with Activating the RR DIFF LOCK with the ARB switch
Feb 1, 2004 | 11:56 AM
#1
Thread Starter
Registered User
Joined: May 2002
Posts: 643
Likes: 0
From: Kent, Washington
Help with Activating the RR DIFF LOCK with the ARB switch
For those of you who have done this mod I need some verfications.
Im following larsdennert instructions.
Looking at the brown connector I see the numbered pins 11115 on the first cluster of connectors.
Im assuming pin 5 is farthest right correct?
I loop a wire connector back to itself in pin 5. If I do that won't the looped wire impede with the connecting of the brown connector to the instrument panel?
If it is possible can you make a quick drawing from the photo as a visual?
Im following larsdennert instructions.
Looking at the brown connector I see the numbered pins 11115 on the first cluster of connectors.
Im assuming pin 5 is farthest right correct?
I loop a wire connector back to itself in pin 5. If I do that won't the looped wire impede with the connecting of the brown connector to the instrument panel?
If it is possible can you make a quick drawing from the photo as a visual?
Feb 1, 2004 | 12:04 PM
#2
Thread Starter
Registered User
Joined: May 2002
Posts: 643
Likes: 0
From: Kent, Washington
Re: Help with Activating the RR DIFF LOCK with the ARB switch
Originally posted by smr4runner
For those of you who have done this mod I need some verfications.
Im following larsdennert instructions.
Looking at the brown connector I see the numbered pins 11115 on the first cluster of connectors.
Im assuming pin 5 is farthest right correct?
I loop a wire connector back to itself in pin 5. If I do that won't the looped wire impede with the connecting of the brown connector to the instrument panel?
If it is possible can you make a quick drawing from the photo as a visual?
For those of you who have done this mod I need some verfications.
Im following larsdennert instructions.
Looking at the brown connector I see the numbered pins 11115 on the first cluster of connectors.
Im assuming pin 5 is farthest right correct?
I loop a wire connector back to itself in pin 5. If I do that won't the looped wire impede with the connecting of the brown connector to the instrument panel?
If it is possible can you make a quick drawing from the photo as a visual?
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Wanted: 4.88 front diff, rear 8'' 4.88
jaretstuff
Axles - Suspensions - Tires - Wheels
1
Aug 4, 2015 02:08 PM
Athansinis
Hot Deals - Free Stuff - Craigslist
0
Jul 27, 2015 08:38 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
Jul 24, 2015 01:44 PM
