good mic n nic in Montana, helena???
#1
Contributing Member
Thread Starter
Join Date: Dec 2002
Location: Helena, Mt.
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
good mic n nic in Montana, helena???
I have just moved to helena MT. and I'm looking for a good shop to work on the truck< SID > His rt frnt wheel seems to be making a new great noise much like an air impact wrench ....gwreeeeeeeeeeeeeeeeeeeeeee. reeeeeeeeeeeee.......eeeeeeeeeeeeeeeeeeeee..eeee.. ..........eeeeeeeeeeeeeeeeeeeeeeee..
any one get the Idea? the front carrier was just replaced and the hubs are after market. I also need a new MAF or at least one that hasn't been messed with. not that I would buy a new one from a shop and will look at one on E-bay or somewhere elese. Sid still has a shutter or stumble at 2k but not as severe as before I went back to OME wires. the EGR doesn't work, so I'm also looking for a way to gut that part of the SMOG stuff as its cold weather poor runner increaser. I type funny but I hope you get the Idea anyways.
any one get the Idea? the front carrier was just replaced and the hubs are after market. I also need a new MAF or at least one that hasn't been messed with. not that I would buy a new one from a shop and will look at one on E-bay or somewhere elese. Sid still has a shutter or stumble at 2k but not as severe as before I went back to OME wires. the EGR doesn't work, so I'm also looking for a way to gut that part of the SMOG stuff as its cold weather poor runner increaser. I type funny but I hope you get the Idea anyways.
#5
Contributing Member
Join Date: Jun 2003
Location: Helena, Montana
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
I once brought my old 2.7L into DJ's Automotive to listen to my piston slap. They seemed nice and he didn't charge me anything for the inspection. Of course all he did was listen to it start on a cold morning. DJ's is kinda tucked out of the way, I'd check the yellow pages and call for directions.
Thread
Thread Starter
Forum
Replies
Last Post
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM