Front and rear Bumper Question
#1
Registered User
Thread Starter
Join Date: Apr 2008
Location: St. Louis
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Front and rear Bumper Question
Ok so I know this is an often asked question, and people will just tell me to search around the forum but wanted to ask the qestion outright.
I have a 2002 4runner Sport, stock except for OME suspension all around shocks and coils 880/906 with the comfort n96's. My rear bumper is rusting on the drivers side, and I thought it would be a good time to replace with a tube style rear bumper, and while I was at it, replace the front as well with a tube style to match.
I do not do very much off roading, I wont buy a winch, and if I bought the ARB front bumper I am afraid that it is heavy enough to sag my front end, at least that is what the ARB rep said when I bought the front suspension, so that brings me finally to my question.
Is there any company that makes tube style front and rear bumpers for the 3rd gen 4 runner? will 4th gen tacoma bumpers fit? Or is this something I will have to get custom made?
Thank you all in advance for any advice you have to give me, just need some opinions on which way to go.
I have a 2002 4runner Sport, stock except for OME suspension all around shocks and coils 880/906 with the comfort n96's. My rear bumper is rusting on the drivers side, and I thought it would be a good time to replace with a tube style rear bumper, and while I was at it, replace the front as well with a tube style to match.
I do not do very much off roading, I wont buy a winch, and if I bought the ARB front bumper I am afraid that it is heavy enough to sag my front end, at least that is what the ARB rep said when I bought the front suspension, so that brings me finally to my question.
Is there any company that makes tube style front and rear bumpers for the 3rd gen 4 runner? will 4th gen tacoma bumpers fit? Or is this something I will have to get custom made?
Thank you all in advance for any advice you have to give me, just need some opinions on which way to go.
#4
Registered User
Join Date: Sep 2008
Location: B-TOWN, Oregon
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
Join Date: Sep 2008
Location: B-TOWN, Oregon
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Join Date: Oct 2008
Location: Dallas, TX
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i was looking into getting a tube/ prerunner style bumper for the front and ended up getting an ARB bumper. I have 882's up front and a winch too and the whole front end has sagged maybe an 1-1.25" already. I've only had the lift on for about 3 months too so the springs are not old by any means. If i would have know these bumpers were out I would have jumped on it.