fog light switch part #
#1
fog light switch part #
Anyone have the part number for the new fog light switch... the one with the small, round amber light (the old ones had a larger, rectangular light)? The parts guy at the dealer is an idiot... I have the part number from the old one, but he can't seem to find that switch that replaced it.
Are they still $10-$15?
Are they still $10-$15?
#4
hmmm... the one I just bought had the round amber light at the top... I wonder if they have different part numbers? Yep, they are different. The part number on mine was 00550-35976 (with the round amber light).
I think I paid $12 and change.
I think I paid $12 and change.
Last edited by Beachrunner; Jul 22, 2003 at 05:12 AM.
#6
Phil wrote an article on this before he passed away:
http://www.4x4wire.com/toyota/4Runner/tech/switch/
http://www.4x4wire.com/toyota/4Runner/tech/switch/
Trending Topics
#9
Originally posted by sschaefer3
Phil wrote an article on this before he passed away:
http://www.4x4wire.com/toyota/4Runner/tech/switch/
Phil wrote an article on this before he passed away:
http://www.4x4wire.com/toyota/4Runner/tech/switch/
#10
I didn't like that other style switch with the amber light. Amber didn't go with my interior
so I went through an exhaustive search to find the other kind and I think it cost me around $8. Mine only had two prongs on the back though, since there is no light.
I found the pedals on eBay for $25 or so. They were the first set that I found that came together that had the dead pedal/foot rest and they look decent so I got them. I had been looking around at some Razo and other type pedals but you had to buy each one seperately and the totals ranged from $55 to $75. I wasn't really into spending that much for a rinky-dink cosmetic mod. Here's some better pix. They are all screwed in to the pedals except for the brake which I need to drill holes into to accept the screws. They are Nokya by the way.
so I went through an exhaustive search to find the other kind and I think it cost me around $8. Mine only had two prongs on the back though, since there is no light.
I found the pedals on eBay for $25 or so. They were the first set that I found that came together that had the dead pedal/foot rest and they look decent so I got them. I had been looking around at some Razo and other type pedals but you had to buy each one seperately and the totals ranged from $55 to $75. I wasn't really into spending that much for a rinky-dink cosmetic mod. Here's some better pix. They are all screwed in to the pedals except for the brake which I need to drill holes into to accept the screws. They are Nokya by the way.
Last edited by Toyota Punk; Jul 22, 2003 at 12:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
toyoda8488
84-85 Trucks & 4Runners (Build-Up Section)
2
Jul 5, 2015 10:18 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM




