Ball Joint Lift for 2nd gen 4-runner
Feb 18, 2004 | 06:31 PM
#1
Thread Starter
Registered User
Joined: Jan 2004
Posts: 26
Likes: 0
From: Franklin, Tn
Ball Joint Lift for 2nd gen 4-runner
Has anyone ever heard of a 1" ball joint lift? Someone had said something to me about it and I was just wondering if anyone had any info about these and where to obtain the bigger ball joints. If anyone knows anything about this please let me know!!!
Feb 18, 2004 | 06:52 PM
#2
Registered User
Joined: Oct 2003
Posts: 1,264
Likes: 1
From: mayport FL
Originally Posted by sigep4runner359
Has anyone ever heard of a 1" ball joint lift? Someone had said something to me about it and I was just wondering if anyone had any info about these and where to obtain the bigger ball joints. If anyone knows anything about this please let me know!!!
I get them next week. I got them for $80 from a guy down in Baja Mexico he runs them on his pickup. I need to maybe do a little deburring with my dremel but they will be ready to install with new grade 8 hardware.
All you have to do is knock the studs out of your upper ball joints then put the spacer in and use the longer hardware. You will have to loosen your torsions a bit for the right caster angles.
Last edited by 934rnr; Feb 18, 2004 at 07:13 PM.
Feb 18, 2004 | 07:01 PM
#3
Thread Starter
Registered User
Joined: Jan 2004
Posts: 26
Likes: 0
From: Franklin, Tn
are these the ball joints???
Are these the joints themselves or do these go somewhere else in the suspension??? If they are the joint replacements who would I contact to order me some???
Originally Posted by 934rnr
You mean these?
I get them next week. I got them for $80 from a guy down in Baja Mexico he runs them on his pickup. I need to maybe do a little de burring with my dremel but they will be ready to installed with new grade 8 hardware.
All you have to do is knock the studs out of your upper ball joints then put the spacer in and use the longer hardware. You will have to loosen your torsions a bit for the right caster angles.
I get them next week. I got them for $80 from a guy down in Baja Mexico he runs them on his pickup. I need to maybe do a little de burring with my dremel but they will be ready to installed with new grade 8 hardware.
All you have to do is knock the studs out of your upper ball joints then put the spacer in and use the longer hardware. You will have to loosen your torsions a bit for the right caster angles.
Feb 18, 2004 | 07:07 PM
#4
Contributing Member
Joined: May 2002
Posts: 6,033
Likes: 3
From: Wandering around Phoenix
Originally Posted by sigep4runner359
Has anyone ever heard of a 1" ball joint lift? Someone had said something to me about it and I was just wondering if anyone had any info about these and where to obtain the bigger ball joints. If anyone knows anything about this please let me know!!!
Feb 18, 2004 | 07:14 PM
#5
Thread Starter
Registered User
Joined: Jan 2004
Posts: 26
Likes: 0
From: Franklin, Tn
broken link
Hey, the link to those websites from that site were broken, any other ways to get to that particular site? or sites?
Originally Posted by Robinhood150
Feb 18, 2004 | 07:21 PM
#6
Registered User
Joined: Oct 2003
Posts: 1,264
Likes: 1
From: mayport FL
Originally Posted by sigep4runner359
Hey, the link to those websites from that site were broken, any other ways to get to that particular site? or sites?
I got them from him for $80 plus $10 shipping.
I am not sure how many he plans on selling of these. Also ellipster is also selling these soon on 4x4wire.com.
Last edited by 934rnr; Feb 18, 2004 at 07:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
vanion2
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
Jul 29, 2015 06:17 PM
coffey50
Offroad Tech
17
Jul 28, 2015 10:55 AM
