Assembled in US ?
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: minnesota
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Assembled in US ?
Looking at a 95 extended cab 4cyl 4x4. Apparently it was assembled in the U.S. Does anyone know anything to look out for before buying it. It has 89k so I know I'll be doing the TC guides in about 15k. I have to look again but I don't think it has Aisin hubs????
thanks alot
Benny
thanks alot
Benny
#2
Contributing Member
Join Date: Jun 2003
Location: Bethlehem, GA
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Look at the VIN:
Position number one represents the country of origin or the final point of assembly. Some examples of the different codes are: 1=U.S.A., 2=Canada, 3=Mexico, J=Japan, 4=U.S.A.
Hope this helps!!
Position number one represents the country of origin or the final point of assembly. Some examples of the different codes are: 1=U.S.A., 2=Canada, 3=Mexico, J=Japan, 4=U.S.A.
Hope this helps!!
Thread
Thread Starter
Forum
Replies
Last Post
punks_is_4x4
86-95 Trucks & 4Runners
1
02-26-2016 04:29 PM
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
10-01-2015 01:03 PM