Assembled in US ?
Sep 10, 2003 | 08:05 AM
#1
Thread Starter
Registered User
Joined: Sep 2003
Posts: 5
Likes: 0
From: minnesota
Assembled in US ?
Looking at a 95 extended cab 4cyl 4x4. Apparently it was assembled in the U.S. Does anyone know anything to look out for before buying it. It has 89k so I know I'll be doing the TC guides in about 15k. I have to look again but I don't think it has Aisin hubs????
thanks alot
Benny
thanks alot
Benny
Sep 10, 2003 | 08:53 AM
#2
Contributing Member
Joined: Jun 2003
Posts: 1,067
Likes: 0
From: Bethlehem, GA
Look at the VIN:
Position number one represents the country of origin or the final point of assembly. Some examples of the different codes are: 1=U.S.A., 2=Canada, 3=Mexico, J=Japan, 4=U.S.A.
Hope this helps!!
Position number one represents the country of origin or the final point of assembly. Some examples of the different codes are: 1=U.S.A., 2=Canada, 3=Mexico, J=Japan, 4=U.S.A.
Hope this helps!!
Thread
Thread Starter
Forum
Replies
Last Post
punks_is_4x4
86-95 Trucks & 4Runners
1
Feb 26, 2016 04:29 PM
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
Oct 1, 2015 01:03 PM
