Another Spongy Brake Problem Thread
09-05-2005, 06:17 PM
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: Tuscaloosa, Alabama
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Another Spongy Brake Problem Thread
My 88 4runner had the notorius spongy brakes. Replaced pads and shoes, cylinders on rear, master cylinder, etc. Bled several times and had the master cylinder rod adjusted. Better but not solved.
Did notice that when we were bleeding the LSPV that every time we pushed the brake pedal, the LSPV rod would move. All I can figure is that it may be bad. Its all that left. We clamped off the rear line and the brake pedal was fine. It seems it has to be in the rear.
Does anybody else notice the LSPV rod move when the push the pedal? It could be bad and I just need to replace it.
Any help appreciated.
Did notice that when we were bleeding the LSPV that every time we pushed the brake pedal, the LSPV rod would move. All I can figure is that it may be bad. Its all that left. We clamped off the rear line and the brake pedal was fine. It seems it has to be in the rear.
Does anybody else notice the LSPV rod move when the push the pedal? It could be bad and I just need to replace it.
Any help appreciated.
Last edited by shawn; 09-06-2005 at 04:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
