ADD to non-ADD Diff Conversion?
May 3, 2007 | 06:26 PM
#1
Thread Starter
Contributing Member
Joined: Oct 2002
Posts: 2,097
Likes: 0
From: Tigard, Oregon
ADD to non-ADD Diff Conversion?
I have a '96 4Runner front ADD diff, and am wondering if I can convert it to non-ADD ?
I know with '86-'95 ADD diffs you could swap the tube on the diff that held the actuator for one from a non-ADD diff to convert it. Can you do this with these '96-up front diffs?
Thanks
I know with '86-'95 ADD diffs you could swap the tube on the diff that held the actuator for one from a non-ADD diff to convert it. Can you do this with these '96-up front diffs?
Thanks
May 3, 2007 | 07:18 PM
#2
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Actually on the 86-95 trucks it was even easier than that. All you had to do was remove the vac lines and lock the actuator into the locked position with a hose clamp. http://www.4x4wire.com/toyota/tech/add/
May 3, 2007 | 09:08 PM
#3
Thread Starter
Contributing Member
Joined: Oct 2002
Posts: 2,097
Likes: 0
From: Tigard, Oregon
Actually on the 86-95 trucks it was even easier than that. All you had to do was remove the vac lines and lock the actuator into the locked position with a hose clamp. http://www.4x4wire.com/toyota/tech/add/
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
Jun 11, 2017 08:36 PM
runnermedic
95.5-2004 Tacomas & 96-2002 4Runners
13
Sep 21, 2015 05:20 PM
zz_denis
95.5-2004 Tacomas & 96-2002 4Runners
2
Sep 6, 2015 03:43 PM
1991, 4runner, actuator, add, conversion, convert, converting, diff, differential, front, nonadd, removal, swap, toyota, tube
