95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

93-95 T100 3.0/Auto - What tranny code?

Thread Tools
 
Search this Thread
 
Old Sep 16, 2004 | 05:17 PM
  #1  
Cebby's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 11,199
Likes: 2
From: Pittsburgh, PA
93-95 T100 3.0/Auto - What tranny code?

I was on Marlin's forum inquiring about the A340F swap. The 4x4wire article (http://www.4x4wire.com/toyota/tech/autocrawler/) mentions Marlin offering machined parts to make this swap an easier switch. He ran into issues with getting the right parts for machining apparently.

I'm awaiting another response, but his last one really intrigued me.

Originally Posted by MARLIN
At the time of that conversion, I orded five 4x4 tail housings and was planning on doing the machine work and supplying them on an exchange basis.
When the housings arrived, they were from 2x4 trucks and I send them back.
Then I found out that a '93-95 T100 3.0 V6 trans would go right in with out any machining.
Here's the whole thread...
http://board.marlincrawler.com/index.php?topic=4645.0

Anyone with a T100 3.0/Auto know their tranny code or somewhere I can find it?
Reply
Old Sep 18, 2004 | 09:31 AM
  #2  
Cebby's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 11,199
Likes: 2
From: Pittsburgh, PA
Bump!
Reply
Old Sep 18, 2004 | 12:01 PM
  #3  
Babypig's Avatar
Registered User
 
Joined: Oct 2002
Posts: 1,091
Likes: 0
From: Calgary
It'll have the a340h as well.
Reply
Old Sep 18, 2004 | 07:36 PM
  #4  
Cebby's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 11,199
Likes: 2
From: Pittsburgh, PA
Are you sure?? Here was a later post from Marlin...

Originally Posted by MARLIN
Because all T100's used a front right drive shaft, it would have the proper oil pan and the 93-95 3.0 V6 uses the dime size magnitic pickup with an unboltable t/case. This means that no maching would be necessary....snip.....The T100 trans already has the proper adapter on the back of the transmission housing that has the 9 bolt t/case pattern.
I'm awaiting another response from Marlin on the matter.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BeMiceElf
Misc Stuff (Vehicle Related)
7
Oct 10, 2015 09:40 PM
markwink
Newbie Tech Section
1
Aug 18, 2015 12:38 PM
greenbuggy
3.4 Swaps
4
Jul 23, 2015 11:51 AM
Iceman4193
86-95 Trucks & 4Runners
3
Jul 15, 2015 04:48 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM




All times are GMT -8. The time now is 09:33 PM.