4Runner swing out tire carrier? Can it be attached to a Tacoma?
Jun 3, 2009 | 08:21 AM
#21
Registered User
Joined: Apr 2008
Posts: 47
Likes: 0
Just keeping this thread alive... Found some help on the UltimateYota forum yesterday. Someone posted up this link
http://www.toyodiy.com/parts/p_U_199...MGEA_6151.html
for an exploded view of the '90 4Runner sheetmetal and found this information
61031 EXTENSION SUB-ASSY, QUARTER PANEL, REAR LOWER RH
61031-89101 RN13*, VZN13*..JPP 1 $316.14
61031-89102 VZN13*..JPP; W(10.5R15 7JJ TIRE) 1 $316.14
61031-89102 VZN13*..JPP; W(10.5R15 7JJ TIRE) 1 $316.14
Rick
http://www.toyodiy.com/parts/p_U_199...MGEA_6151.html
for an exploded view of the '90 4Runner sheetmetal and found this information
61031 EXTENSION SUB-ASSY, QUARTER PANEL, REAR LOWER RH
61031-89101 RN13*, VZN13*..JPP 1 $316.14
61031-89102 VZN13*..JPP; W(10.5R15 7JJ TIRE) 1 $316.14
61031-89102 VZN13*..JPP; W(10.5R15 7JJ TIRE) 1 $316.14
Rick
Jul 8, 2009 | 02:18 PM
#26
Thread Starter
Registered User
Joined: Mar 2009
Posts: 15
Likes: 0
From: El Paso, TEXAS
Its a SnugTop Camper shell with a built in Tube roof rack. It supposed to be able handle up to 300lbs. I have carried alot of heavy loads on it with no problems. The one thing I wont do is go off camber with loads on top. I put that stuff inside.
Jul 8, 2011 | 11:01 PM
#28
If you let all the air out of the spare then the strain on the tailgate tire mount will be greatly reduced....it has to do with accelerating masses.
So here's my reality for getting the spare out from under the Taco....
http://ttora.com/forum/showthread.php?t=173455
ZUK
So here's my reality for getting the spare out from under the Taco....
http://ttora.com/forum/showthread.php?t=173455
ZUK
Last edited by ZUK; Jul 8, 2011 at 11:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
