4runner "grey wire mod"
#21
i just tried this mod and am having trouble. can anyone help???
i grounded the blue/red wire going to the black box. i grounded it on the bolt that the black box was secured to. could it be the grounding isnt good enough?
i grounded the blue/red wire going to the black box. i grounded it on the bolt that the black box was secured to. could it be the grounding isnt good enough?
#28
man wish I had a locker! question for you guy with electric lockers, this may also apply to air lockers as well. when your locker is engaged and locked, can you unlock it at any speed or will this damage drive train and diff components?
Last edited by 401toy; Nov 5, 2009 at 07:47 AM.
#29
Back from the dead, but since its halloween it seems appropriate. I just did this mod and to confirm (or repeat what everyone else has said):
1) Remove the kick panel from the floor and the driver side
2) Locate the black box, mine had ABS written on it. The green box is the 4wd computer, but thats not the one you want.
3) Cut the blue\red wire and ground the end that is coming out of the white plug. I used a bolt that was already being used by a ground by 2 brown wires, its just above the green box.
4) Put everything back together and test it out.
1) Remove the kick panel from the floor and the driver side
2) Locate the black box, mine had ABS written on it. The green box is the 4wd computer, but thats not the one you want.
3) Cut the blue\red wire and ground the end that is coming out of the white plug. I used a bolt that was already being used by a ground by 2 brown wires, its just above the green box.
4) Put everything back together and test it out.
#32
Well I finally broke down and decided to do this mod since I had the trim and seats out to hunt down a water leak. So after twisting my 44 year old body into the most unnatural position, lo-and-behold, I already did it!!! I have no idea when I did but sure enough, it works!!! I swear I'm getting that old-timers disease... I can't remember what it's called though...
#33
so in order to get it to engage over 5mph do you also have to cut another wire other then grounding one? does anyone have problems w abs light on after doing this mod? just curious before i cut wires, this seems like the least expensive coolest mod ever!
Thread
Thread Starter
Forum
Replies
Last Post
steve miller
General Electrical & Lighting Related Topics
2
Oct 10, 2015 01:40 AM




