95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

3rd gen interior acoustics

Old Jun 14, 2010 | 08:15 PM
  #21  
Ron Helmuth's Avatar
Registered User
 
Joined: May 2007
Posts: 2,175
Likes: 2
From: Denver metro area-CO
would like to see a pic of that rideexileex

thanks Ritz no the Infinity BassLink is not custom to the 4Runners whatsoever. You know I went with the bungees because invariably as soon as I screw/bolt it down I need to take it out for a cargo run. This gives me the greatest flexibility to move it around out of the way and still keep it secured.

It used to just sit like this and it stuck up too far and was always wanting to tip over so I had to screw 2 brackets down and then it was always in the way.
Attached Thumbnails 3rd gen interior acoustics-99-4runner-bass-link-installed-position-004.jpg  
Reply
Old Jun 14, 2010 | 09:21 PM
  #22  
rideexileex's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2009
Posts: 276
Likes: 0
From: Seattle / Bozeman, MT
I'll see if I can snap some pictures tomorrow for you. My favorite aspect about the woofers pointing downward into the floor is that it naturally protects the speakers. I have no worries about throwing whatever in the rear end and having the cones damaged. Also, the design also allowed me to run eye-bolts through the bottom part of the box that is still off the carpet, and I ran steel cable through them and the cargo D rings, which secure it from theft and from dislodging in an accident. BTW the cable is proven design effective - when my last 4runner rolled, the box was dangling from the floor, which at that time was the ceiling :p
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
diingodog
86-95 Trucks & 4Runners
8
Jan 11, 2018 10:39 AM
39 Thieves
86-95 Trucks & 4Runners (Build-Up Section)
1
Jan 6, 2017 01:08 PM
digitalracer
Items Wanted
2
May 16, 2016 03:57 AM
izzmee
86-95 Trucks & 4Runners
9
Aug 17, 2015 10:20 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 11:29 PM.