What do you guys do for aftermarket exhaust systems besides the TRD one. I did a search but didn't find anything.

 

Just buy a nice muffler like a Magnaflow and have a shop make you one;this route when I take it will keep the cost under $300. TRD stuff while it is nice is just overpriced when you can buy the same results and quality for less. An exaustt on an NA Runner is more about the sound since HP gains are minimal but going with a 2 and 1/4 system you might feel a little more midrange increase.

 

Alright is there any specific size of Magnaflow muffler that we need? Also does it benefit to have manderal bent piping or is crush bent alright as well?

 

Jardine has a nice cat back for the 3.4. Check out Cory's web page below for combinations and sound bites. Might help you out.

http://pnw4runners.com/exhaust/exhaust.htm

 

you MUST be kidding.

bob

 

Crush bent is fine for our applications;it's more about the sound you deise or don't desire. I hear (hehe) the Magnaflow 18" mufflers can be a bit loud but alot of people do like the 24" version.

 

What size is the stock piping? Is there a benefit when using 2 1/2 inch piping vs 2 1/4?