3.4L Turbo Kits coming soon!
08-16-2006, 12:30 PM
#141
Registered User
Thread Starter
Originally Posted by midiwall
Welcome to YT!
Yeah, we know about STS, but the problem with them happens to be their claim to fame.
Their "remote mounting" concept doesn't work well when you're talking about trucks that play in the dirt - our undercarages take quite a beating. STS is more popular over on CustomTacos.com where most of those guys are looking for street power.
Yeah, we know about STS, but the problem with them happens to be their claim to fame.
Their "remote mounting" concept doesn't work well when you're talking about trucks that play in the dirt - our undercarages take quite a beating. STS is more popular over on CustomTacos.com where most of those guys are looking for street power.Another thing with the turbo being that far back is the lag it can cause. I have only ran 6lbs of boost so far but am getting it at around 2300 rpms with almost no lag whatsoever. With that being said, it looks like a nicely built kit regardless of the design..
08-16-2006, 01:21 PM
#142
Registered User
Join Date: Aug 2006
Location: Utah
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by elnip
There are plenty of posts on this board about STS. Majority of folks(including me) do not want to run it. Too much potential for off roading damage and way expensive. I see you are a newbie and from UT, affiliated?
I never said their design was the best, and I understood the downside to having that type of setup. Just because I am new to this board doesnt make me a truck newbie. I have owned and offroaded a 4runner and 2 tacos, and currently have a 97 T100, so I understand these trucks pretty good. And no LOL, I am not affilated with squires.
08-16-2006, 01:25 PM
#143
Registered User
Originally Posted by CaptainZ
I never said their design was the best, and I understood the downside to having that type of setup. Just because I am new to this board doesnt make me a truck newbie.
You didn't give us any background on you or your own feelings about STS (in fact, it sounded like you liked them), so (personally) I figured that you were probably a street guy that wandered over from another forum.
08-16-2006, 01:27 PM
#144
Registered User
Join Date: Aug 2006
Location: Utah
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by midiwall
I don't think anyone took a shot at you... You asked if we knew about STS and you got the answer.
You didn't give us any background on you or your own feelings about STS (in fact, it sounded like you liked them), so (personally) I figured that you were probably a street guy that wandered over from another forum.
You didn't give us any background on you or your own feelings about STS (in fact, it sounded like you liked them), so (personally) I figured that you were probably a street guy that wandered over from another forum.
Update?????
08-30-2006, 03:34 PM
#149
Registered User
Btw Greedy Washington already passed california style CARB Law but it is contingent on Oregon doing the same
http://www.heartland.org/Article.cfm?artId=17354
http://www.heartland.org/Article.cfm?artId=17354
09-01-2006, 09:53 AM
#150
Registered User
Originally Posted by midiwall
Gregg (Greedy) is on the dyno tomorrow at 2pm.
Originally Posted by greedy
Well, as it seems to be the norm with this project - something came up... I went over to carb conn. at 2:00 pm and nobody was there. Turns out one of the projects they were working on took alot longer than expected so they ended up having to deliver the car to the owner somewhere pretty far away.
Needless to say I didn't get any dyno time.
Not that big of a deal I guess as it will give me an opportunity to do some more road tuning, finish the exhaust (this morning), and track down why I am throwing this damn p0141 code for the rear o2 sensor (i am not running any cats and need to check if the o2 sim we installed is working correctly). Other than that though it is running tits!!
I will have it in there next week, as soon as I set a day and time I will let you know!
Needless to say I didn't get any dyno time.
Not that big of a deal I guess as it will give me an opportunity to do some more road tuning, finish the exhaust (this morning), and track down why I am throwing this damn p0141 code for the rear o2 sensor (i am not running any cats and need to check if the o2 sim we installed is working correctly). Other than that though it is running tits!!
I will have it in there next week, as soon as I set a day and time I will let you know!
09-01-2006, 09:59 AM
#151
Registered User
Originally Posted by thefallman
Btw Greedy Washington already passed california style CARB Law but it is contingent on Oregon doing the same
http://www.heartland.org/Article.cfm?artId=17354
http://www.heartland.org/Article.cfm?artId=17354
If implemented, the new law will require a 30 percent cut in automotive CO2 emissions from all new cars and light trucks sold in the state by 2016.
Gregg's engine is original, the add-ons are legal to the word of that law as it applies in WA.Please don't sidetrack this thread into a duplicate of your other one.
09-01-2006, 11:24 AM
#152
Registered User
i started that thread after i posted this here and it applies to "Greedy"'s post
and thats why i started the other thread so as not to get off topic here
and thats why i started the other thread so as not to get off topic here
Last edited by thefallman; 09-01-2006 at 11:51 AM.
09-11-2006, 01:07 PM
#155
Registered User
Thread Starter
Sorry guys I forgot to post up the results of the first Dyno here!
At 7psi of boost here is what I got:
Not too bad for such a small boost level. I am installing a few more URD goodies to smooth out the curve and get rid of a fuel cut i am experiencing due to the MAF seeing too much flow in the charge pipe. Back to the dyno soon to see what she can do at 12 psi
At 7psi of boost here is what I got:
Not too bad for such a small boost level. I am installing a few more URD goodies to smooth out the curve and get rid of a fuel cut i am experiencing due to the MAF seeing too much flow in the charge pipe. Back to the dyno soon to see what she can do at 12 psi
Last edited by Greedy; 09-11-2006 at 01:09 PM.
09-11-2006, 01:09 PM
#156
Registered User
Gregg got on the dyno on 9/5. From the CT thread:
His truck is torn apart again... from a PM on 9/6:
I saw him on 9/7, he's hoping to give it all another run "soon".
Originally Posted by Greedy
Well - Finally made it to the dyno and got her all tuned in up to 7 lbs! Here is the chart
http://thumb2.webshots.com/t/59/659/3/0/47/2777300470056669162qCxVGc_th.jpg
The AFR'S were pretty steady between 11.0 - 11.6. I had an issue with the MAF seeing too much air and causing a fuel cut that leaned me way out and had to shut er down. I have ordered a voltage clamp though, installing this weekend and will be back on the dyno next week to see what some more boost does :headbang:
I am pretty happy with the results seeing that the best I did with the S/C - urd fueling etc.. was 234 HP and 330 TQ - and that was at 11 lbs!!
http://thumb2.webshots.com/t/59/659/3/0/47/2777300470056669162qCxVGc_th.jpg
The AFR'S were pretty steady between 11.0 - 11.6. I had an issue with the MAF seeing too much air and causing a fuel cut that leaned me way out and had to shut er down. I have ordered a voltage clamp though, installing this weekend and will be back on the dyno next week to see what some more boost does :headbang:
I am pretty happy with the results seeing that the best I did with the S/C - urd fueling etc.. was 234 HP and 330 TQ - and that was at 11 lbs!!
His truck is torn apart again... from a PM on 9/6:
My truck is in pieces in my garage - took off the down pipe, crossover, wastegate to replace all the gaskets with copper to prevent exhaust leaks. I am also considering taking off the turbo manifold and have everything ceramic coated. We will see though.
09-11-2006, 02:00 PM
#158
Registered User
I think it's fun to compare how this engine runs with a turbo versus a well tuned S/C'd system:
This is Gregg's: (272rwhp/379ft-lbs)
http://community.webshots.com/photo/...56669162qCxVGc
Here's TRDOLDMAN's latest dyno sheet: (304rwhp/355ft-lbs)
http://rides.webshots.com/photo/2301...62561490NeOcaG
Gotta figure the difference being gearing/wheel size, etc.
This is Gregg's: (272rwhp/379ft-lbs)
http://community.webshots.com/photo/...56669162qCxVGc
Here's TRDOLDMAN's latest dyno sheet: (304rwhp/355ft-lbs)
http://rides.webshots.com/photo/2301...62561490NeOcaG
Gotta figure the difference being gearing/wheel size, etc.
09-11-2006, 02:38 PM
#159
Banned
Join Date: May 2006
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
specs as far as? didnt see a list up of what he had on his setup with the trd sc.
Im still debating because of high gas and i dont know if i can afford premium and on top of that the sc plus mods and what not
Im still debating because of high gas and i dont know if i can afford premium and on top of that the sc plus mods and what not
09-11-2006, 02:49 PM
#160
Registered User
Thread Starter
Unfortunatley you still have to run premium with the Turbo as well, up front cost will be about the same, but install requires more work and tweaking. But, the power you can gain "should" be more... we will see when I get back on the dyno and tune at a higher boost setting.
