22r engine in Tacoma shell
04-11-2016, 12:25 PM
#1
Registered User
Thread Starter
Join Date: Mar 2016
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
22r engine in Tacoma shell
Is it possible to put a 22r engine into a 98 Tacoma 4x4 body. Just curious about it I assume it wouldn't be worth it but I have a 22r engine and saw the Tacoma body for sale and wondered if it's possible.
04-15-2016, 12:03 AM
#3
If you need to ask the question the answer most likely be no.
While I love the 22R series engine getting the OB II system to work could be quite interesting .
Unless your just building a off road vehicle that get hauled to where your driving which would I think need to be all private land
Then you would need to custom build the exhaust because your fuel tank is on the left side.
If you need something to get you away from the wife have a few extra thousand $$$ it would be a interesting and expensive project to reduce the horsepower
While I love the 22R series engine getting the OB II system to work could be quite interesting .
Unless your just building a off road vehicle that get hauled to where your driving which would I think need to be all private land
Then you would need to custom build the exhaust because your fuel tank is on the left side.
If you need something to get you away from the wife have a few extra thousand $$$ it would be a interesting and expensive project to reduce the horsepower
Thread
Thread Starter
Forum
Replies
Last Post
