2001 4runner Ignition Lock Cylinder Replaced
01-04-2014, 11:36 AM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Portland, Oregon
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
2001 4runner Ignition Lock Cylinder Replaced
Replaced locksmith-lock on 4runner after two days of it being sticky.
Disconnected negative battery
Unbolted 4x10mm bolts
Removed plastic tab under ignition key light
Placed key in ignition and turned it to ACC
Used 1/8" screw driver to move lock spring rod up
Pulled ignition cylinder out.
Used this video to guide me..
[YOUTUBE]
[/YOUTUBE]
Purchased part #LC63640 at Auto Zone for 69.99. Dealer wanted close to $150.
This was my first time doing this. It took under 10 minutes.
Disconnected negative battery
Unbolted 4x10mm bolts
Removed plastic tab under ignition key light
Placed key in ignition and turned it to ACC
Used 1/8" screw driver to move lock spring rod up
Pulled ignition cylinder out.
Used this video to guide me..
[YOUTUBE]
Purchased part #LC63640 at Auto Zone for 69.99. Dealer wanted close to $150.
This was my first time doing this. It took under 10 minutes.
Thread
Thread Starter
Forum
Replies
Last Post
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
05-02-2016 09:10 PM
