2000 Tacoma Steering Loose
01-13-2012, 11:56 AM
#1
Registered User
Thread Starter
Join Date: Jan 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2000 Tacoma Steering Loose
My 2000 steering is really sloppy. The tie rods are in good shape but i was wondering how loose the bushing should be on the rack itself. It has a bit of slop but the driver side shaft actually moves a bit up and down when you steer back and forth. Should I rebuild the seals and do a bushing kit? Or, is the slop in that shaft make the whole rack bad. Check out the video and please help.
Cheers!
http://www.youtube.com/watch?v=pp07y...1&feature=plcp
Cheers!
http://www.youtube.com/watch?v=pp07y...1&feature=plcp
01-13-2012, 12:16 PM
#2
Registered User
Join Date: Jun 2009
Location: Madison, WI
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
01-13-2012, 12:45 PM
#4
Contributing Member
Last time I read something about sloppy steering the guy's next post was about ball joint failure. It was a 3rd gen 4Runner though. Should he check those, too?
01-13-2012, 01:20 PM
#5
Registered User
Thread Starter
Join Date: Jan 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
01-13-2012, 01:50 PM
#6
Contributing Member
Last edited by habanero; 01-13-2012 at 01:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: Parting 2000 4Runner Limited 4WD Marysville, WA
DeathCougar
Vehicles - Parting Out
54
04-01-2018 11:29 PM
TJWilly
95.5-2004 Tacomas & 96-2002 4Runners
6
07-31-2015 02:05 PM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM
