I put my 2" Mr. R Brown bodylift in today on my 2nd gen surf and all went as it probably should. I had the bottom end of the steering linkage loose b4 I did anything. I did notice though that the steering shaft needed opening at the top end and not the bottom and it extended as soon as I had done this ... then things got tight again and when I loosened the top even more and reloosened the bottom end again it extended too. Even after all was lowered back down as it should the rag joint bushing still looks a bit too wavey for my liking. Otherwise all is rosey in the garden

 

Bet it looks silly with a 2" lift and those little tyres.

 

Got any pictures? I always like checking out over seas Toyota's.

 

Is that where you're trying to drive in your picture?

 

I never thought about it that way.

 

This is before I did it, I took the pic in front of the cabin specially coz its good for before and after pics...


and this is all I can show you (unless you want grizly detail) of what happened yesterday


(and Delboy try some iron in you next time you try to tighten your crank pulley on)

 

(and Delboy try some iron in you next time you try to tighten your crank pulley on)[/QUOTE]

Ooh! Saucer of milk!