1990 Cruise control help

Reply Subscribe

Thread Tools

Search this Thread

Oct 18, 2004 | 06:18 PM

NathanBERG

Thread Starter

Banned

Joined: Jul 2004

Posts: 373

Likes: 0

From: Washington State

1990 Cruise control help

Hello, I own a 1990 4runner With the 3.0 v6. My cruise control hose is not conected to anything on the passenger side and I can not find any place for it. Where dose this darn thing hook up at??? I have a Haynes repair manual and it dose not show the Cruise control at all.

thanks for any info on this Problem.!

Last edited by NathanBERG; Oct 18, 2004 at 06:28 PM. Reason: spelling

Oct 18, 2004 | 08:14 PM

4Crawler

Contributing Member

iTrader: (3)

Joined: Jun 2002

Posts: 10,821

Likes: 34

From: SF Bay Area, CA

Your cruise control servo is vacuum operated most likely. That hose needs to hook to a vacuum source on the intake manifold somewhere. Not sure of the V6 location, but on my 22RE, it attaches to the back of the intake, on a 3-port fitting. If there are none free, find a constant vacuum line and add a tee-fitting itno an existing line.