2DoorJoRunner

This is my First thread post and my first shot at uploading pictures so please be gentle!

Current Mods
Installed 9-17-2011
OME Lift and suspension
Ball Joint spacers and 901 coils.

Future mods (Not in any particular order)
3.4 (hopefully)
Manual trans swap--- installed 4-22-2014
Exhaust--- installed 10-2011
S&B intake--- installed 11-13-2013
Stereo--- installed 10-2011
CB radio--- installed 10-2011
Manual hubs--- installed 12-2011
Gears
Locker
Skids and other armor.
Diff breather--- installed 1-21-2014

I got this back in may of this year

http://www.flickr.com/photos/67740550@N02/6167928758/, on Flickr

Bone stock, 3.0, Auto, SR5, 4WD

My Mom owned it since 2002. She lives in Wyoming while I live in Cali, I knew she owned a 4runner but had no clue it was a 2door till earlier this year.

She spoke of selling her 4runner due to lack of use and it was just a curbside ornament. The more I heard about it then more attractive it sounded. So I asked her to send me some photos of it and as soon as I saw them I was hooked. It was nicer than my ol 88 in almost every way!

I offered to buy it from her and she laughed saying you fly up here and spend some time out here and it was simply mine to drive back!

2DoorJoRunner

So after changing the oil, ATF, coolant, rear diff fluid, filling it up and pouring in some SeaFoam. Myself and two buddies of mine drove it 1100 miles back to Cali in about 16 hours straight.

17-19 Mpg and not a single issue. Truck sat for almost 2years with an occasional start up to make sure the battery wasnt dead.

Of course it wasnt long till I had to take it on a Fire road nearby my home

2DoorJoRunner

SMOG TIME! (I was dreading it with good ol CALI standards.....

However!!!!!



Good ol seafoam!

MaK92-4RnR

You passed with flying colors... lol you weren't even an average polluter. my NO was measured very high on my truck. if they keep raising it, i dont think it'll pass.

you should hit up the pismo jamboree. its this weekend!

www.pismojamboree.com

2DoorJoRunner

Well now that that was a dead issue time to take the old man look out of this ride!

It needs my personal touch, needs to look like something I would actually rock out in the trail!



http://www.flickr.com/photos/67740550@N02/6167370089/http://www.flickr.com/photos/67740550@N02/6167370089/ by http://www.flickr.com/people/67740550@N02/, on Flickr

New goodies !

Oh and did I mention its awesome having a father who has been an Automotive Tech for 30+ years?

http://www.flickr.com/photos/67740550@N02/6167896794/http://www.flickr.com/photos/67740550@N02/6167896794/ by http://www.flickr.com/people/67740550@N02/, on Flickr

BJ spacers up front.

http://www.flickr.com/photos/67740550@N02/6167907746/http://www.flickr.com/photos/67740550@N02/6167907746/ by http://www.flickr.com/people/67740550@N02/, on Flickr

Stock 21 year old parts fully drooped.

http://www.flickr.com/photos/67740550@N02/6167369353/http://www.flickr.com/photos/67740550@N02/6167369353/ by http://www.flickr.com/people/67740550@N02/, on Flickr

Pops doin work!

http://www.flickr.com/photos/67740550@N02/6167364557/http://www.flickr.com/photos/67740550@N02/6167364557/ by http://www.flickr.com/people/67740550@N02/, on Flickr

Extended brake line From Marlin Crawler. Installed and loomed by yours truly!

2DoorJoRunner

I know I was shocked. Your motor itself is stock no? I know about the exhaust but everything else is pretty much oem correct?

2DoorJoRunner

Oh and btw Mak, your runner is a true inspiration man. Its legit!

I wish I could do the jamboree =( I just know I got too much on my plate right now to try and go this time round. Soon tho! I havent been to pismo since I was a kid lol.

2DoorJoRunner

Both of these are front shocks.....




I think it was time to replace dont you?

2DoorJoRunner

My buddy grinding away on the UCAs to get the spacers to fit.



Uh oh she has rear wheels on!

http://www.flickr.com/photos/67740550@N02/6167898390/http://www.flickr.com/photos/67740550@N02/6167898390/ by http://www.flickr.com/people/67740550@N02/, on Flickr

2DoorJoRunner

And now the bitter with the sweet.

S0 after the man hours installing the lift I was lazy and decided I didnt want to wash the truck by hand. Gonna take the easy route and go through a drivethrough car wash!

Well, didnt go as planned. Seems that rust from living in the snow for at least the last 15 years up and rear its ugly head.....

http://www.flickr.com/photos/67740550@N02/6167893404/http://www.flickr.com/photos/67740550@N02/6167893404/ by http://www.flickr.com/people/67740550@N02/, on Flickr

Guess the brush whips snagged on the trim which wasnt truly attached to the truck due to the rust.....

http://www.flickr.com/photos/67740550@N02/6167893918/http://www.flickr.com/photos/67740550@N02/6167893918/ by http://www.flickr.com/people/67740550@N02/, on Flickr

The plastic trim that caught.

http://www.flickr.com/photos/67740550@N02/6167356703/http://www.flickr.com/photos/67740550@N02/6167356703/ by http://www.flickr.com/people/67740550@N02/, on Flickr

and the reason why it wasnt attached.

2DoorJoRunner

The under carriage itself aint bad. Some bolts are a true pita to loosen but no real issue. Just 4 spots in total with the cancer. I'll address it when I do some research. Until then I just quick fixed the trim issue so I could finally post some full pictures of the lift installed.

2DoorJoRunner

and finally........





http://www.flickr.com/photos/67740550@N02/6167348371/http://www.flickr.com/photos/67740550@N02/6167348371/ by http://www.flickr.com/people/67740550@N02/, on Flickr

http://www.flickr.com/photos/67740550@N02/6167336621/http://www.flickr.com/photos/67740550@N02/6167336621/ by http://www.flickr.com/people/67740550@N02/, on Flickr

2DoorJoRunner

For any curious on the lift itself I used

https://www.yotatech.com/forums/f116...riteup-201297/

stockwell45

iTrader: (1)

Definitely the cleanest 2 door I've ever seen, it's nice to see one not all beat up like everybody seems to do to theirs these days. Too bad you cant make pismo, it would be a real treat to see. Keep up the good work.

2DoorJoRunner

Thank you. I appreciate it. I'll Have to take some pictures but the interior is pretty mint. Like incredible considering the age. There is like 3 dash cracks and just a little drivers seat wear.

2DoorJoRunner

So since I bought the truck the rear Tire swing has been driving me crazy, it rattles like the cans on the back of a newlyweds ride.... SOOOOOOOO I found a cheap easy way to get rid of the slop in both the carrier and thus said rattle!!!!





http://www.flickr.com/photos/67740550@N02/6173899129/http://www.flickr.com/photos/67740550@N02/6173899129/ by http://www.flickr.com/people/67740550@N02/, on Flickr

All in all spent about 7 bucks and it took ALL noise away from the tire carrier. It closes with a solid thud.

The reason for the washers is that it had forward backward play and not up and down play, meaning the hinges werent having the issue but the bumpstops and latch were. You can go to this thread to see me cry about it. lol

https://www.yotatech.com/forums/f88/...ng-help-28667/

2DoorJoRunner

Busy weekend for me. Got the Alignment done finally! My a family member of mine is a pretty incredible tech and he got me set up nice at his work. The truck rides even better now. Considering i had a 3 degree toe.....

Also, I got some more goodies!!!!



My current headlights are totally sketch. Also I have a bumpstop issue. if youll look below.



See that slight scratch on the shock? Ya the lip on the stock bumpstop rubs at compression...... But the weird thing is that it doesnt do that on the passenger side.



My new poly bushings. All the front bumpstops plus the rear sway bar kit. These are low pro stops but not the ultra low pro.



comparison to stock.



My old shadey headlights.....



New and shiny!



Bumpstops were also installed but I ran into a rusty broken bolt issue with the rear swaybar. HOPEFULLY fixed tomorrow.

Redwood

how did you get the lift out of the front? tweek the torsion bars?

2DoorJoRunner

I put ball joint spacers up front, there is a pic of the passenger side front end, the one with the bad drop light glare, the ball join spacer is being installed in that one.

50Runner

Looking good! Heres a link for a thread on 2 doors...one more is always good

https://www.yotatech.com/forums/f116...und-up-236554/