DHFHades' 88 4runner build
05-17-2012, 07:53 PM
#21
Registered User
Thread Starter
Join Date: Mar 2012
Location: Battle Ground
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
ok, finally got the heads off. and there seems to be problems, there is some corrosion in all 6 cylinder walls were the fuel sprays in...not sure if it needs bored out or not, so here's a pic
it looks worse than it is...I can feel it if I run my finger nail over it...but barely.
sorry for the gigantic pic...wanted to make sure it got the detail
it looks worse than it is...I can feel it if I run my finger nail over it...but barely.
sorry for the gigantic pic...wanted to make sure it got the detail
05-18-2012, 12:14 AM
#22
well you know now but the camshaft has to come out to get to some of the head bolts. as far as the walls go. your looking to see if you still have the hatch marks i think. im not much help into engine rebuilds as i havent done one
05-18-2012, 08:56 AM
#23
Registered User
Thread Starter
Join Date: Mar 2012
Location: Battle Ground
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
the cross hatching is still there, but the pistons have a bit of slop, so I'm just gonna go ahead and have it bored out...its only 108 bucks, then I'll have a few more horses to play with
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
XtraCab
Solid Axle Swaps, All Years
18
04-12-2020 05:25 AM
