Do tell, do tell

 

sas kit or front axle?

 

Tons and 42's?

 

a jeep?

 

Bingo! haha except now I'm buying the axle on Friday cause the guy driving from Pahrump that I'm buying it from ran in to some car troubles. I haven't decided what route I'm going to take exactly yet, but I think I am going to be going the 3" trail gear kit front and running Chevies in the rear with 35" KM2's...I've also been considering RUF but I think that using the kit will be the best option for me right now.

 

Not quite yet

 

Here she is!

 

Nice man!!!

 

looks good on the SAS project, I just changed my frame from a 1987 IFS to a 85 SAS

Rear bumper is the best I've seen...............can not wait for the tire carrier.......

 

Thanks man, I hope mine turns out as clean as yours! I just re-read through your whole build thread.

 

Thanks man! I'll post up some pictures of the tire carrier, it's 99% done. I just have to find the charger for my camera battery and I'll post up some good pictures of it. I have a build thread for it as well just search under my posted threads.

 

nice! called it haha. going to be pretty sweet hopefully my pickup follows down the road yours is taking

 

does any one have a diagram for the fuel injectors? My 89 toyota pickup is v6 3.0 and I just bought it and have done complete tune up and replaced the fuel injectors and replaced the oxygen sensor. I am barely getting 100 miles to each full tank of gas and I found that one of my injectors is still not working cause there is no power to it. Please help!!!!

 

I don't have one, but try googling 89 toyota pickup v6 fuel injectors and see what you find...if nothing make another thread on here and see if someone can help you.

Side note since I'm in my build thread, a little update....I got my axle rebuilt, for now, so I can get it under the truck this wkend...gunna have to take it apart again next week cause I ordered some dirty 30's and chromo hub gears. I also got a set of 36x12.50 super swampers for free from a buddy. Also picked up a set of 63 inch chevys and ordered the sky swap kit. Sorry no pictures, my camera battery is dead and I don't know where the charger went, I'll grab some cell phone pics tomorrow maybe.

 

Quick update...I didn't take too many pictures cause there are so many sas writeups there wouldn't be anything everyone hadn't seen, but here are a couple. Yesterday I got all of the IFS cut off, got the holes for the shackle tubes cut, and tacked in place the front hanger. Should finish the front up today.





the free 36's:

 

Nothing quite like the sound of IFS parts hitting the floor! Very nice.

 

Free tires? Great.........free is good

 

Very true, but it was like losing and old friend

Exactly, free is for me!

Here she is....90 percent done, still need to finish burning in the shock hoop gussets, bump stop, steering stabalizer....but the rear is still stock so it looks like a bro truck so no side pics yet

 

Very nice front end, looks great, hope mine turns out that good!!!!

 

Lookin good! Pretty quick too