88 Runner
Jan 18, 2013 | 08:29 AM
#23
Thread Starter
Registered User
Joined: Dec 2012
Posts: 223
Likes: 0
From: Montana
Trying to upload some more photos... Building a rear bumper and a center console. Will update later. Finally figured out photobucket with updating adobe flash player... Enjoy some pics soon...
[/IMG]
[/IMG]
[/IMG]
[/IMG]
Jan 18, 2013 | 08:58 AM
#29
Thread Starter
Registered User
Joined: Dec 2012
Posts: 223
Likes: 0
From: Montana
[IMG]
[/IMG]
Side view of 84 sliders removable mud flaps 12" bobbed bed.
Truck has 4" All Pro front springs 1/2 Ton 88-98 Chevy rears 5100 billstiens on all 4's.
Dual Marlin Crawler t-cases Ra-design Triple stick. 5.29 gears aussie out back open front, marlin high steer. 22R weber carb with w56c tranny 35x12.50x15 KM2's... Much more to come...
[/IMG]Side view of 84 sliders removable mud flaps 12" bobbed bed.
Truck has 4" All Pro front springs 1/2 Ton 88-98 Chevy rears 5100 billstiens on all 4's.
Dual Marlin Crawler t-cases Ra-design Triple stick. 5.29 gears aussie out back open front, marlin high steer. 22R weber carb with w56c tranny 35x12.50x15 KM2's... Much more to come...
Jan 18, 2013 | 09:03 AM
#30
Thread Starter
Registered User
Joined: Dec 2012
Posts: 223
Likes: 0
From: Montana
[IMG]
[/IMG]
2000 toyota 4runner hood scoop glued to scrap hood for a quick cover. 3.4 swapped r150. 4" rancho diff drop with 4" blocks in the back...
2008 cat 246c skid steer in the back with foam filled tires closed cab. Also has steel tracks with grousers and a 4000lb log grapple!!!
[/IMG]2000 toyota 4runner hood scoop glued to scrap hood for a quick cover. 3.4 swapped r150. 4" rancho diff drop with 4" blocks in the back...
2008 cat 246c skid steer in the back with foam filled tires closed cab. Also has steel tracks with grousers and a 4000lb log grapple!!!
Last edited by 88_Red_Runner; Jan 18, 2013 at 09:04 AM.
[/IMG]
[/IMG]
[/IMG]
Jan 18, 2013 | 04:38 PM
#35
Thread Starter
Registered User
Joined: Dec 2012
Posts: 223
Likes: 0
From: Montana
[IMG]
[/IMG]
Engine bay no emissions in MT. The only thing you get is a check engine light.
You can see that i used the cruise control throttle cable bracket for my accelerator bracket.
[/IMG]Engine bay no emissions in MT. The only thing you get is a check engine light.
You can see that i used the cruise control throttle cable bracket for my accelerator bracket.
Jan 18, 2013 | 04:44 PM
#36
Thread Starter
Registered User
Joined: Dec 2012
Posts: 223
Likes: 0
From: Montana
[IMG]
[/IMG]
Interior photos. Dont mind the stereo wiring it is not complete. Still need to wire rear speakers and pocket. If you look close, I used a Turbo glove box. The computer is in the glovebox.
[/IMG]Interior photos. Dont mind the stereo wiring it is not complete. Still need to wire rear speakers and pocket. If you look close, I used a Turbo glove box. The computer is in the glovebox.
[/IMG]
[/IMG]
[/IMG]
