I am looking for a front winch bumper for my 83. Not stuck on a brand,but i want a rockcrawler type tube bumper. I am in east TN.

 

I just installed an ARB on my 83. The earliest they offer is for an 84, but the mods required are not complicated. You have to shorten the wings of the bumper by about 2”, and you need a piece of 2”x4” steel box beam to go between the bumper and front frame crossmember.

 

You have any pics of this on your truck?

 

 

Dam that fit really nice, thanks for the pic. The bed is pretty cool too!

 

She's my dolled up wood hauler. Needed a COVID project while I was trapped at home, so I did a full frame-off resto-preservation. The paint is a driveway job, not perfect but looks good enough from a distance. the dump bed is a conversion by Pierce intended for a Ford pickup that I grafted to the Toyota chassis/bed. works great.

For the bumper, the only mod you really need to do is cut off about 2" from each wing. I welded them onto the opposite sides because they formed close to the factory end treatment (instead of an open cut channel). You also need a piece of 2"x4" box beam about 24" long to go between the front frame crossmember and the bumper. I just welded it to the frame and then bolted the bumper to it.

 

you can clearly see the extra box beam in this pic

 

Very cool man!