I mainly just have body parts left. Mirrors, windows, doors, bench seat.
An a 4speed manual transmission with 50k miles.

Probably not anything thats worth shipping.
But let me know if you want to buy local before she goes to the scrapper.
Frame is rusted out, bed is pretty bad rust and holes in floor boards. $400

 

I need the heating ducts inside the cab, all the cables that connect to the themostat controls. I also need the vents themselves

IE the part that directs air out of the blower to the side vents and the lower center vents.
KCCO
shipped to 99504

 

Oh boy.... let me see what I have of them... the vents I think are good... the duck work was in pretty bad shape that went directly to the vents... 30+yrs took its toll. did you want that or the hardplastic thats off the blower motor directly

 

Anything still going on here? I need some donor metal off the body, the radiator/ hood support metal primarily. I also need bolts, trans bolts, mount bolts, axle bolts

Drivers side left kickpan metal and passenger side pillar base metal would be nice too!

Thanks!

 

Just took it to the scrap yard the other day. Almost kept the hood an tailgate.
But running out of room. Sorry....

Ive torn apart a 89 4runner 84 4x4 pickup an 82 2x4 pickup...

The transmission bolts do very a little bit.. I have a bunch left over from all kinds of stuff... I think I used my axle nuts off the 4runner for somethin else.. An I have sheet metal from a truck bed I cut down...

 

any wiring left from the 82 ?

 

No sorry... the wiring in the 84 that I put the motor in was pretty effed up.. so I used the 82 wiring.... just a buncha shredded stuff and pigtails left over from the 84

 

any ducting?

 

Truck went to the scrap yard... pulled alot of parts.... duct work was shot though

 

damn! all i need is the center vent section and driverside defrost duct.