Terrys87

iTrader: (1)

You have this style mirror with brackets?? Preferably Chrome.

frm_808

iTrader: (1)

Looking to see if you can source me a 3rd brake light assy. This is the brake light the sits on top, in back of the rear of the cab.
Also a pass door outside handle and latch assy.

1987 Toyota pickup turbo sr5 4x4

Thanks,
Steven

muddmadness

Charcoal canister, PM if you have one

kawazx636

iTrader: (3)

I have two canisters

muddmadness

can u pm me with a price?

Helokid

Hello, i have a 1998 4x4 limited and looking for a front driver seat and carpet.

victor_26

WTB set of front mudflaps for a 2000 Tacoma. 96 to 04 will work.

Munkymag

Let me know if you come across a good turbo manifold i need too replace my cracked one i have now. Thanks

RatGDH

I fix one thing and something else breaks. Do you have a drivers side mirror for a 92 4runner SR5? The plastic that holds the mirror in has dried out and cracked breaking the ears off.

mmetzgier

hi im looking turn signals, front bumper, valance and a skidplate for a 95 pickup.i have the bumper lights just need the ones on the side of the headlights.

jbm715

iTrader: (2)

Tacoma or the year before tacomas

mmetzgier

sorry its for a 95 pickup not a tacoma.

Thomas Reynolds

1990 Toyota 4X2 Pickup Base.

Looking for a 22RE A/C Compressor bracket.

Thanks.

pago619

morning, I just recovered my 86' 4x4 truck after it was gone for three months.(stolen) Problem that I have is that it is missing the rear driveshaft and I have no idea what I am looking for as far as if it was a one piece shaft or two piece. There is not a center support/bearing as far as I can tell. Manual tranny, long bed btw. Anything you can help me with would be greatly appreciated. Thanks

secondhandstoke

Need a set of 4x4 or 4wd mudflaps for 1986 4runner as well as an sr5 cluster (efi, 5 speed)and pair of rear view mirrors for the same year if anyone got em!

Yotaboy79

Looking for an ORIGINAL front bumper and radio speaker for my 79 Toyota Pickup 4WD,

kawazx636

iTrader: (3)

Attention members and subscribers to thread,

YotaTech member jbm715 (the creator of this thread) has been permanently banned from YotaTech. Numerous complaints had been received by staff members regarding this user's lack of communication, inaccurate part descriptions and undisclosed damage. Upon further investigation, it was discovered that this user was here solely as a means of doing business and did not contribute to the forum community in any other manner - such business should be conducted as a paid vendor. It's not fair to other paid vendors who help pay the bills to keep this forum running well and free of cost to it's general membership.

It was decided among the staff that jbm715 should be permanently banned in order to uphold the integrity of this forum and to protect you all as our members. This thread will be moved to "The Classifieds GraveYard" section. While YotaTech is not held responsible for any transactions among members, please be aware that if you conduct any future business with jbm715 that you are proceeding at your own risk. I apologize if this causes any of you and inconveniences in your part searches, but we made this decision in the best interest of this community as a whole. Feel free to contact me with any questions or concerns.

Thank you,
Dave