I bought a rolled '96 4Runner and am parting it out. It has tan or oak color interior.


Parts Sold:

• Wood Trim
• Front Cup Holder
• MAF
• VSV

And some other stuff I cant think of right now.


For Sale:
Parts - Price

• Grab Handle - $15
• Rear Gate Window Relay - $45
• Rear Window Switches - $20ea.
• Front Passenger Window Switch - $20
• Front Driver Side Window Switch - $45
• Power Mirror Switch - $25
• Window Motors - $25ea.
• Seat Belts - $25ea.
• Middle Seat Belt - $20

Thats just a small list I made off the top of my head. I have many more parts, just PM me with what you need!



The motor will be posted for sale soon.

Thanks!

 

Dang, wish you could have posted this about a week ago, I would have Gladly bought the MAF from ya. Well, if your parting out stuff what will you sell the Dimmer light switch for? When I try to adjust mine I start getting a buzz/humm noise through the speakers. lol I dont know what i did to the switch. its wiggin' out.

 

Do you have the cat and just one o2 sensor? If so how much?

 

Did it have an e-locker by any chance?

 

if the front end 4x4 setup is in good shape. give me the transmission, transfer case, front diff, the shifter and tcase shifter and console inside, all of the front end and driveshafts please

 

I am looking for the spare tire pulley that holds the tire in place under the rear and I am also looking for the handle for the jack.

calebjones@hotmail.com

 

i need a front tow hook does the 3rd gen fit on the 2nd gen?

 

What color is the interior? If it's oak, I need the driver's side kick panel if it's in good shape and possibly a couple of other things. Let me know.

 

got front doors ? what would ya want for them ?

 

If it has e-locker - I'll take the whole axle. How much?

 

Also curious as to the color of the interior. Looking for the top piece that covers the dashboard, as well as a rear cargo mat.

 

It does, but its going in my '98.

 

The auto tranny, transfer case, and 4.30 front diff are all going in my '98. I will be selling the 5-speed trany and transfer case and the 4.10 front and rear diffs out of it shortly.

 

No it's not the same.

 

The E-locker axleis going in my '98. And Canada would be a little far to ship that big of a thing. LOL

 

But the bolt holes are in the same spot arent they?

 

The driver side door is shot, and I think the passenger side door is too.

 

I have responded to everyones PM's and have sent a PM to everyone who posted in here.

Thanks

 

Yes but the plastic/fairing is not. 90-95 4Runner hooks shoot forward and down at a 45 degree angle. 1st Gen Tacoma and 3rd Gen 4Runner hooks go straight down at the mounting point at a 90. Same thing with factory YJ/TJ, same bolt holes, different hooks.

Very different part with the same bolt holes.

 

Wanna go into what 89-95 Pickup hooks look like? Not the same again.