Parting Out '96 4Runner
I bought a rolled '96 4Runner and am parting it out. It has tan or oak color interior.
Parts Sold:
For Sale: Parts - Price
The motor will be posted for sale soon. Thanks! |
Dang, wish you could have posted this about a week ago, I would have Gladly bought the MAF from ya. Well, if your parting out stuff what will you sell the Dimmer light switch for? When I try to adjust mine I start getting a buzz/humm noise through the speakers. lol I dont know what i did to the switch. its wiggin' out.
|
Do you have the cat and just one o2 sensor? If so how much?
|
Did it have an e-locker by any chance?
|
if the front end 4x4 setup is in good shape. give me the transmission, transfer case, front diff, the shifter and tcase shifter and console inside, all of the front end and driveshafts please
|
I am looking for the spare tire pulley that holds the tire in place under the rear and I am also looking for the handle for the jack.
calebjones@hotmail.com |
i need a front tow hook does the 3rd gen fit on the 2nd gen?
|
What color is the interior? If it's oak, I need the driver's side kick panel if it's in good shape and possibly a couple of other things. Let me know.
|
got front doors ? what would ya want for them ?
|
If it has e-locker - I'll take the whole axle. How much?
|
Also curious as to the color of the interior. Looking for the top piece that covers the dashboard, as well as a rear cargo mat.
|
Originally Posted by nc994run
(Post 1000309)
Did it have an e-locker by any chance?
|
Originally Posted by neliconcept
(Post 1000314)
if the front end 4x4 setup is in good shape. give me the transmission, transfer case, front diff, the shifter and tcase shifter and console inside, all of the front end and driveshafts please
|
Originally Posted by bluedoyle
(Post 1000422)
i need a front tow hook does the 3rd gen fit on the 2nd gen?
|
Originally Posted by NPE701
(Post 1000661)
If it has e-locker - I'll take the whole axle. How much?
|
Originally Posted by sschaefer3
(Post 1000884)
No it's not the same.
|
Originally Posted by Ric
(Post 1000649)
got front doors ? what would ya want for them ?
|
I have responded to everyones PM's and have sent a PM to everyone who posted in here.
Thanks |
Originally Posted by 914runner
(Post 1000891)
But the bolt holes are in the same spot arent they?
Very different part with the same bolt holes. |
Wanna go into what 89-95 Pickup hooks look like? Not the same again.
|
All times are GMT -8. The time now is 04:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands