Parting 86 4Runner (Tempe, AZ)
#1
Parting 86 4Runner (Tempe, AZ)
Hey guys,
All prices are OBO!
Photo album can be found here!
Contact Info
Name: Nic
Location: Downtown Tempe, AZ near ASU
Contact: reply to this thread or PM me
1986 4Runner 4x4 22RE
Truck has been sold, I only have a few parts remaining! See below!
Aftermarket Parts
All aftermarket parts have less than 2,000mi on them, so they're practically brand new. Only taken out to the trails once or twice.
Front Range Off-Road Full Floater rear axles
This is fully assembled, bolt on and go. No parking brake (I used 4Runner front calipers instead of the Celica/Supra calipers because the celica/supra calipers were impossible to find at the time). I paid roughly $1600 brand new.
Price: $1000



Old Man Emu Torsion Bars
Product Link
These are practically brand new, only 2,000mi on them.
Price: $100

Thanks for looking! Feel free to haggle (reasonably) and ask any questions!
All prices are OBO!
Photo album can be found here!
Contact Info
Name: Nic
Location: Downtown Tempe, AZ near ASU
Contact: reply to this thread or PM me
1986 4Runner 4x4 22RE
Truck has been sold, I only have a few parts remaining! See below!
Aftermarket Parts
All aftermarket parts have less than 2,000mi on them, so they're practically brand new. Only taken out to the trails once or twice.
Front Range Off-Road Full Floater rear axles
This is fully assembled, bolt on and go. No parking brake (I used 4Runner front calipers instead of the Celica/Supra calipers because the celica/supra calipers were impossible to find at the time). I paid roughly $1600 brand new.
Price: $1000



Old Man Emu Torsion Bars
Product Link
These are practically brand new, only 2,000mi on them.
Price: $100

Thanks for looking! Feel free to haggle (reasonably) and ask any questions!
Last edited by NicCantDecide; Aug 12, 2013 at 07:42 AM. Reason: updated sale items
#6
Hey im down here in tucson, Now I saw you listed you had the full floater stuff, but do you have a complete ifs axle? anything in the diff or gears?
#7
I pulled the full floater stuff out of the axle housing on the truck and put the stock semi-floating drums back on.
The rear axle has a 4cyl diff with a lock-rite locker and stock gears. It's setup with Trail-Gear spring perches for my lift kit, so it will not be a direct swap for a stock truck. Not sure on the gearing for 1986, but tire size is 29" and its a 5speed if that helps.
If you're interested in the whole package with the axle housing, diff, and full floating axles, send me a PM and we can discuss it.
Trending Topics
#8
Hi. Do you have the cover that goes over the rear
Windshield wiper motor and power mirriors? Thanks
Windshield wiper motor and power mirriors? Thanks
#9
Thanks!
#16
Bilstein shocks and dual stage t-stat are sold!
I'm fairly flexible on price for most of these items, so let me know what you need!
I'm fairly flexible on price for most of these items, so let me know what you need!
#17
would the rear body metal be a bad request right now?




