OME Tacoma/runner Front shock parts
#1
OME Tacoma/runner Front shock parts
Hey Guys,
I just bought a set of N91s front shocks off this forum some time back and they were sent to me without any hardware or spring plates that the coil sits on.
If anyone here has a set of shoks that are bad, or some that are no longer being used, I will gladly pay for the hardware needed to install them. The shocks I bought are brand new, but I can't install them. I tried ARB and a few other vendors, but everyone says I have to buy new shocks to get the hardware!!!!!
Help!!!!! Anything parts/information is greatly appreciated!
I just bought a set of N91s front shocks off this forum some time back and they were sent to me without any hardware or spring plates that the coil sits on.
If anyone here has a set of shoks that are bad, or some that are no longer being used, I will gladly pay for the hardware needed to install them. The shocks I bought are brand new, but I can't install them. I tried ARB and a few other vendors, but everyone says I have to buy new shocks to get the hardware!!!!!
Help!!!!! Anything parts/information is greatly appreciated!
Last edited by TACOKRAWL; Feb 26, 2007 at 04:58 PM. Reason: Added information
#3
You might post up on TTORA forum too - a lot of those guys might have old shocks laying around from going to Coil-Overs.
john
john
#6
This might help...
1995 1/2-
00 Front Shock Bushing Set- OE Shocks Only - Energy Suspension part number: 8.8101
Top Spring Plate: http://www.autopartsauthority.com/pa...ke_code=TO&x=1
1995 1/2-
00 Front Shock Bushing Set- OE Shocks Only - Energy Suspension part number: 8.8101
Top Spring Plate: http://www.autopartsauthority.com/pa...ke_code=TO&x=1
Last edited by Mojo_Risin; Mar 13, 2007 at 12:11 PM.
#7
Mojo,
The parts I need are specific to the old man emu shocks. OEM parts will not work. I may have confused everyone with the "spring plate". Yhe plate I need is the one for the OME's that slides over the shock that the lower part of the spring sits on.
Matt
The parts I need are specific to the old man emu shocks. OEM parts will not work. I may have confused everyone with the "spring plate". Yhe plate I need is the one for the OME's that slides over the shock that the lower part of the spring sits on.
Matt
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
Aug 30, 2016 01:03 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM




