New to YotaTech but have been selling parts on MUD for a long time (bowser). Feel free to go to mud and see what I'm parting. I also used YotaTech for research on a 3.4 swap I did on a 89 pickup recently. Now I'm gearing up to do the swap in an 88 runner.

I routinely part out 80 series cruisers so I have piles of coils lying around in my shop. I have 4-5 pairs of front and rear coils. $45 plus shipping per pair.

 

I want a rear pair of cruiser coils to lift my 92 Runner, what is your paypal and what would total be with shipping to 32935

Money is ready and I'm waiting, what's the chances of you matching the coils for me? Meaning two highers or two lower's doesn't matter to me as opposed to the mismatched like stock?

And last question, you take paypal?

 

i'd like the same as the gentlemen above, give me the other two matched pairs he didn't take shipped to 91351

 

I also want rears (matched if possible) shipped to 90605.

 

for 45 bucks i might be interested in a pair of FRONt coils.

 

Ditto on the fronts! Shipping to 41042?

 

Here is a few quotes on shipping
32935 - $30
91351 - $20
90605 - $20
41042 - $27
PM me if you want a pair of these springs.
I'll be skiing all weekend but can ship Monday.

 

Do you still have a pair of FRONTS for the rear of my 97 4Runner? Shipping to 19713.

 

Payment enroute

 

AK and MT, eh?

Good deal on springs. Too bad I dont need a lift

 

Yes I do still have front springs. Was cleaning out my shop last night and I currently have 6 pairs of front springs and 4 pairs of rear springs left.

As far as the AK - MT. I have a house in Sterling AK and one in Bozeman MT. I go back and fourth every 6 weeks or so. Depending on the weather and what projects I have.

 

new to site hope this isnt a stupid ???? Is there a difference between the earlier FJ and FZJ front springs as far as length.

 

JT spoke to you on sat. re 7 wrap front springs for 4runner rear lift. Have tried to call several times, so I thought Id try the forum instead. PM me or call. you have my number. Bob in Boise

 

If you do still have a rear coils from 80 series, could you help me with finding some specs of it?
I know that they are 7" outside diameter on the top. I need to find the inside diameter of the last wrap on the bottom to see if they will fit my custom design rear suspension. Stock coils should be around 17-18 in free length, am I right?
Could you help me finding it by measuring one of your rear 80-series coil?

 

As far as inner dimensions. The Lower end resting on the axle is 4" inner. The upper end resting on the frame/coil bucket is 5.75". Hope that helps.

 

This is helps. Thank you. Do you by the chance know the stock coils rate? You have the stock coils, am I right?

 

do you still have a pair of front coils available for sale? if so can you please pm me with a price for the shipping?

 

i sent you a pm about the rear coils, not sure if you got it

 

pm'd

 

I would like a pair of 7-wrap front FZJ-80 coils for the rear of my 4Runner. Let me know if you have any and what shipping would be to 98501.
Thanks!