So I was trolling through ebay.uk and ebay.au today (i was bored at work) and I came across a couple of huge finds and thought I'd post some linkys

Anyone restoring a 1st gen 4runner interior? here is a complete interior kit for $31.00AU! Hurry sale closes in 12hrs.!
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=001

2nd/3rd gen leatherette luggage cover

http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=014

2gen truck altezza tail lights
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=008

Keyless entry system with keyblanks for $19.99 UK (about $40 US)
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=009

Wooden gear shift knobs New!
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=022

Clear corners with turn signal lights! http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=012

turn signal repeaters (front fender mounted) style #1 2genrunner/3gen truck stock style
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=022

style 2 tacoma equivilant and later model 4runner stock style
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=020

Fancy trim rings for style 2 above $20.00AU/pair!
flame http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=022
batman http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=022
eagle http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=002

This is just a taste of the great goodies the rest of the world gets... NA bites...

 

Those are great finds but im sad to say the ones that say Hilux, are only going to fit the hilux unless your prepared to do some MAJOR custom body work to make them fit. the hilux body is 100% different from any other Toyota. i have gone to a Hilux Specific junk yard here and the only part that fit another Toyota was the 1989 grille, which is the same as the 1989 pick-up grille anyway.
but the 4runner parts are a really nice find. i wish i could get the luggage cover but my roll bar would be in the way.

 

I know some of those Hilux parts are designed to fit the hilux stock but it is a relatively simple mod to fit the side signal lights to anything else they would be the only ones that needed any body moding.
The interior kit is admittedly out of a right-hand drive truck but most of the parts would readily swap over.
I think the hardest one from a wiring standpoint would be the Keyless entry but they include instructions so long as you have power locks you're good to go...