Hello all,
I was spending some time on craigslist looking for a wheel and tire combo for my upcoming trip to raush creek (running pizza cutters as of now) I found a set of 5 rims and tires off a H3 in great condition for 300 OBO. My 84 has the same bolt pattern as a chevy/hummer 6 bolt pattern. But im unsure about the hub bore on the H3 rims. i tried a search on this forum but only found a hummer with wooden wheels . and i also tried googling the info but had no luck..... Anybody here tired this combo or know someone who has.... AND if it were to fit... would i need spacers so i wouldnt get rubbage? thanks all.
~Stout

 

My guess is that the H3 center bore is too small, just like the center bore on my Tahoe rims, same bOlt pattern but incompatible with out machine work.
With the offset you would also need to run wheel spacers

 

:/ poop.... im on a budget here!!!1

 

well these look like they would fit ?

 

A tape measure and a few minutes with a 19mm & jack will confirm or denY.
I just know my 04 Tahoe rims will not fit my '81

 

^ your right.... they are a few miles down the road so ill just try to slap em on.... how much are spacers?

 

The thin kind are about 20 bucks for just a few MM to clear something, the bolt on ones are more pricey. Can't recall off the top of my head.

 

http://www.wabfab.org/Wheel-Spacers.html

$85 before the Yotatech discount

 

Might be a day late/dollar short but anyway...
H3 wheels got a hub bore of 3 7/8", I have a drive flange off my 94 in my toolbox that measures at 4 1/8". So without boring the hub on the wheels, they at least won't fit a ifs truck.